These specially designed vents are great for underfloor, in-wall and to fit ventilation of your steel, cement, brick or timber building. FV VENTS addresses the problem of how we vent the structure neatly when we have colour and design considerations and desire a quality professional finish. These work especially well when you want to place a subfloor vent in your building onto modern cladding such as Multiclad, K-Panel, Loclad, and Panelrib.
Lysaght Architectural Claddings from the Zenith range like Longline, Enseam, Imperial, Dominion and Baroque roofing and walling.
Stramit Sharpline, premier 300, Monopanel.
Metroll MAC Nail Strip, MAC Snap Lock, MAC standing Seam, Interlocking panel.
Stratco Nailstrip Hiland Tray and Snaplock Hiland Tray.
These claddings with a very low profile or flat tray are what this FV vent is really suited for.
These vent plates are available in Zincalume, Galvanised (Gal) Colorbond and Stainless Steel(call us). Vents come supplied with pop rivets and spark excluding mesh for BAL purposes.
FLAT MOUNT VENTS ARE AVAILABLE IN THE FOLLOWING SIZES:
- 150 x 300mm Rectangle Flat Vent
- 200 x 200mm Square Flat Vent
- 300 x 300mm Square Flat Vent
- 400 x 200mm Rectangle Flat Vent
- 330 x 777mm Big Flat Vent
- 320 x 1000mm Big Flat Vent
- 330 x 1200mm Big Flat Vent
OTHER PROFILE VENTS ARE ALSO AVAILABLE IN THE FOLLOWING SIZES:
- 300 x 500mm Big Corro Vent
- 320 x 777mm Big Corro Vent
- 320 x 1000mm Big Corro Vent
- 320 x 1100mm Big Corro Vent
- 200 x 200mm Square High Profile Monoclad & Trimdek
- 200 x 400mm Rectangle High Profile Monoclad & Trimdek
- 300 x 500mm Rectangle High Profile Monoclad & Trimdek
- 390 x 750mm Big High Profile Monoclad & Trimdek
- 390 x 970mm Big High Profile Monoclad & Trimdek
- 390 x 1170mm Big High Profile Monoclad & Trimdek
Ideal for venting
- Sub-Floors
- Subfloor areas
- Exhaust Fans
- Bathroom Exhaust
- Kitchen Exhaust Fan
- Air Flow
- Gas build up vents
- Chemical sheds and buildings
- Ceilings
- Generator Sheds
- Feed sheds
- Much more!
TAKE A LOOK AT THE AVAILABLE SIZES
The FV Colorbond Flat Vents 150×300 FV CFV specially designed vents are great for underfloor, in-wall and to fit ventilation of your steel, cement, brick or timber building. FV VENTS addresses the problem of how we vent the structure neatly when we have colour and design considerations and desire a quality professional finish. These work especially well when you want to place a subfloor vent in your building onto modern cladding such as Multiclad, K-Panel, Loclad, and Panelrib.
The FV Colorbond Flat Vents 200×200 FV CFV specially designed vents are great for underfloor, in-wall and to fit ventilation of your steel, cement, brick or timber building. FV VENTS addresses the problem of how we vent the structure neatly when we have colour and design considerations and desire a quality professional finish. These work especially well when you want to place a subfloor vent in your building onto modern cladding such as Multiclad, K-Panel, Loclad, and Panelrib.
The FV Colorbond Flat Vents 300×300 FV CFV specially designed vents are great for underfloor, in-wall and to fit ventilation of your steel, cement, brick or timber building. FV VENTS addresses the problem of how we vent the structure neatly when we have colour and design considerations and desire a quality professional finish. These work especially well when you want to place a subfloor vent in your building onto modern cladding such as Multiclad, K-Panel, Loclad, and Panelrib.
The FV Colorbond Flat Vents 400×200 FV CFV specially designed vents are great for underfloor, in-wall and to fit ventilation of your steel, cement, brick or timber building. FV VENTS addresses the problem of how we vent the structure neatly when we have colour and design considerations and desire a quality professional finish. These work especially well when you want to place a subfloor vent in your building onto modern cladding such as Multiclad, K-Panel, Loclad, and Panelrib.
Big Flat Vents LV via the ShedBlog are available in 4 sizes and all Standard Colorbond colours, Zincalume or Galvanised. These wall vents are suitable for flat or predominately flat profiled walls especially suited to architectural claddings like Lysaght Enseam 465 and Stramit Sharpline 490. Each vent comes with a woven alloy mesh insert and coloured rivets.
OTHER PROFILE VENTS AVAILABLE
The Corrugated Corro Mount Vents specially designed vents are great for underfloor, in-wall, and to fit ventilation of your steel building. Corro VENTS addresses how we vent the structure neatly when we have a corrugated wall. These vents are available in Zincalume, Galvanised (Gal) Colorbond and Stainless Steel(call us). Vents come supplied with pop rivets and spark excluding mesh for BAL purposes.
Our selection of High Profile Mount Vents, caters to a variety of needs and preferences. Crafted for underfloor and in-wall ventilation in steel buildings, these vents provide practical solutions for maintaining airflow. Addresses the common problem of no flat surface being available when mounting a vent onto a High Profile wall like Trimdek, Monoclad, Trimclad or Superdek.
To order Aluminium Wall Vents Click Here
To order Colorbond Wall Vents Click Here
PEOPLE ALSO ASK
Yes, you can mix the colours of vents if writing that in the order box provided when ordering.
For Mixed Sizes and colours – email your request to admin@shedblog.com.au with your requirements, your shipping address and colours and sizes and Shedblog will email you an electronic invoice.
For Mixed Sizes and colours – email your request to admin@shedblog.com.au with your requirements, your shipping address and colours and sizes and Shedblog will email you an electronic invoice.
Yes, these vents come in Colorbond, and Zincalume and also can be done in a Galvanised finish for use on galvanised cladding.
These are our larger ventilation solutions for sheds, warehouses, factories, workshops etc. Colorbond Steel Vents are shipped to the site in most circumstances subject to your location, orders to remote sites may be refused and refunded if in doubt enquire before ordering.
Minimum Order for Corro Mount Vents = 6 pack
Make sure to describe the orientation of the vent and the orientation of your sheeting, especially when ordering rectangular plates or vents.
Our manufacturer has set a minimum order quantity of 6. With 24 different colours and up to 6 various shapes, that’s 144 x 6 = 864 plates that would need to be made just to keep 6 or each colour on the shelf. The economics of the plates, given they are processed by hand at the machines means that 6 is the minimum order quantity available.
A majority of our buyers are electricians and they often have use for more. You can split colours and sizes ordering by email should that assist you to hit a qty of 6. You can also add in corro vents plates to make it up to six.
Any questions?
check out THE comprehensive FAQ page
or contact our customer service team now on 0456 729 904
or email us at admin@shedblog.com.au
