Combining the best features of fin fixed and face fixed window design and available in 20 Colorbond® colours
The exterior has a trim bead to conceal the fixing screws. There are no fasteners visible externally when installed correctly. The sashes are independent of frames making them more energy-efficient and can be cheaper to re-glaze if a glass pane is broken. The window latches at the mullion for easy access. Windows are designed and sized to work with the most common shed wall profiles.
The Windows have 16mm rollers with tyres that do not form ‘flat spots’ and stainless steel bearings to ensure smooth and easy operation. Far superior to cheaper windows that operate on plastic guides that often break and are difficult to open and close! These are the best windows for your shed.
These windows are quick and simple to install, instructions are provided with every window. They are self-flashing when correctly installed so there is no need to provide any other metal flashings to trim or waterproof these windows. They have a 19mm fin on all sides to assist with the simple fixing into position with a few Tek screws.
AVAILABLE SMALL WINDOW SIZES
- 790mm x 589mm (the small toilet window)
- 790mm x 589mm PV (permanent vent)
- 790mm x 816mm (the size down from a standard window)
AVAILABLE MEDIUM WINDOW SIZES
- 790mm x 1274mm (often referred to as a standard size window)
- 895mm x 1274mm
- 790mm x 1505mm (next wider size up from standard)
- 895 x 1505mm
AVAILABLE LARGE WINDOW SIZES
- 790mm x 1731mm
- 895mm x 1731mm
- 1200mm x 970mm
- 1200mm x 2040mm (coupled sliding window)
All these great windows are engineered to meet or exceed all Australian wind regions. Ask us for full product options and engineering details if you require them. These widths are sized to fit most common steel wall sheeting profiles used for Australian sheds.
Cyclone region shed windows – Glazing is available for some shed windows that will meet the impact requirements of AS1170.2 2002 Clause 5.3.2. This glass can replace the requirement to provide expensive externally fixed ‘cyclone screens’, required for some windows in cyclonic regions C & D. These windows also provide added security. If you have special requirements that you don’t see on this page then please contact us.
For Bushfire Windows and Doors the 5mm Toughened Glass suits to BAL-29 and we recommend the addition of Aluminium screens. For BAL-40 you require 6mm Toughened Glass and all glazing must be protected by an external screen.
We can supply these windows Australia-wide. Normal lead time approx. 2 weeks. They are specially packaged for transport via National distribution networks. Please ensure that all packages are inspected upon delivery for any damage. These AMIA windows are by Australia’s largest window supplier to the steel shed industry and have a 7-year warranty (conditions apply).
We can supply these new windows Australia wide. Normal lead time approx 2-3 weeks, Custom glass lead time can be 4 weeks. They are specially packaged for transport via national distribution networks. Please ensure that all packages are inspected upon delivery for any damage. These AMIA windows are by Australia’s largest window supplier to the steel shed industry and have a 7-year warranty (conditions apply). *** Note – Lead times have extended due to Covid-19, and high demand currently.***
Find out how to install this product