Corro Mount Plates address the all to common problem of no flat surface when mounting your fittings onto a corrugated or Custom Orb wall. Works with all standard Custom Orb and corro profiles (not mini orb) . These plates are available in Zincalume, Galvanised (Gal), Colorbond, and Stainless Steel(call us). Minimum order quantities of 6 plates applies **
Mount Plates for Trimdek, Monoclad walls available now here.
Standard Corro Mount Plates are available in:
- 150 x 150mm Square
- 250 x 250mm Square
- 300 x 300mm Square
- 400 x 400mm Square
- 150mm (2 corrugations) x 300mm wide
- 300mm (4 corrugations) x 150mm wide
Shipping in Australia – $18 added during check out.
We can ship these to New Zealand see notes below.
Ideal for mounting
- Power Points
- Hooks and Hoops
- Smoke detectors
- Lights and Lamps
- Ceiling Fans, Vents
- Taps, Nozzles,
- Water, Gas, Electrical Pipes
- Much more!
NEW ZEALAND – Corro mount plates and vents will work satisfactorily with standard corrugated profile in NZ that has a 762 mm cover. Colours differ so please see standard colours at www.colorbond.com and choose a close match or select a colour suitable to repaint.
Suits Corro with a depth of up to 18mm , more that 18mm contact us first.
During check out, on the Shipping & Delivery page select location as New Zealand at the top. This will add the required standard air freight and packing to the order.
** You may split colours by telling us in the notes box when buying. These mounts plates have a minimum quantity order which is 6. Please make sure you order enough as we cannot ship extras later unless it is in an order of 6 or more. Selecting GAL (Silver/Grey) over-rides other colour selections. If you need custom size mount plates email firstname.lastname@example.org