Big Flat Vents LV

AU$1,040.60
NEW!!
330x777 Big Flat Vent LV
Please choose
320x1000 Big Flat Vent LV
Please choose
330x1200 Big Flat Vent LV
Please choose
Colorbond Colour Required
Enter your text
21mm deep corro
1
Save this product for later
Share this product with your friends
Big Flat Vents LV
Product Details

Big Vents via the ShedBlog are available in 4 sizes and all Standard Colorbond colours, Zincalume or Galvanised. These wall vents are suitable for flat or predominately flat profiled walls especially suited to architectural claddings like Lysaght Enseam 465 and Stramit Sharpline 490. Each vent comes with a woven alloy mesh insert and coloured rivets. These Big flat vents are only available in vertical format, Style C.

These steel vents will help you meet B.A.L 29 requirements with their alloy mesh.
The Galvanised versions extend to reach B.A.L 40 with its galvanised mesh.

The vent when riveted in place acts as a truss across the sheeting, so they require no additional support system or adding extra strength to the sheet. A silicone bead is required to seal the profiles at the top and side only with the flat vents.

If wind-driven rain penetrates, it hits the mesh directly behind the louvres and runs down the cavity area between the mesh and pan of the sheet, running out the unsealed bottom.

How to Order – Understand the big flat vents are only available in Style C (tall & narrow). If required, via the airflow chart locate the size and number of vents you want based on total airlfow you want to achieve. The minimum order is 6 vents. From the drop-down menus, please select the pack sizes that suit you best? Enter in the text box what Colorbond colour, Zincalume or Gal you require? You may mix your colour choices if you wish. You can combine packs to get the quantity needed. If you need something different contact us at admin@shedblog.com.au.
or on 0456 729 904.

Shipping Notice

Shipping for these products is as follows.
NSW, VIC & QLD $60
SA & TAS $70
WA $100
NT - Please email us at admin@shedblog.com.au

They travel by TOLL Road and their on-forwarders. Some locations may be deemed inaccessible by the freight network and will require collection from a regional depot.


PEOPLE ALSO ASK

Do these vents come in Zincalume?

Yes, these vents come in Colorbond, Zincalume and also can be done in a Galvanised finish for use on galvanised cladding. Matt colours not available.

Can I mix sizes and colours for corro mount vents?
Yes, you can mix the colours of vents by writing that in the Colour required box provided when ordering.
For Mixed Sizes and colours – email your request to admin@shedblog.com.au with your requirements, your shipping address, colours and sizes required and Shedblog will email you an electronic invoice.
What is the minimum order for corro mount vents?
Minimum Order for Corro Mount Vents = 6 pack

Make sure to describe the orientation of the vent and the orientation of your sheeting, especially when ordering rectangular plates or vents.

Our manufacturer has set a minimum order quantity of 6. With 24 different colours and up to 6 various shapes, that’s 144 x 6 = 864 plates that would need to be made just to keep 6 or each colour on the shelf. The economics of the plates, given they are processed by hand at the machines means that 6 is the minimum order quantity available.
A majority of our buyers are electricians and they often have a use for more. You can split colours and sizes ordering by email should that assist you to hit a qty of 6. You can also add in corro mount plates to make it up to six.
What are OAL - Wall Louvre Vents?

These are our larger ventilation solution for sheds, warehouses, factories, workshops etc. Colorbond Steel Vents are shipped to site in most circumstances subject to your location, orders to remote sites may be refused and refunded, if in doubt enquire before ordering.


ANY QUESTIONS? CHECK OUT THE COMPREHENSIVE FAQ PAGE
OR CONTACT OUR CUSTOMER SERVICE TEAM NOW admin@shedblog.com.au



Any questions? 
check out THE comprehensive FAQ page

or contact our customer service team now on 0456 729 904 
or email us at 
admin@shedblog.com.au