Retroseal Eaveseal is much like Houseseal except that it has been designed to suit long-spanning roof sheets like often found in industrial and commercial applications and also on patios and verandas. It matches the underside profile of these sheets.

Eaveseal Mesh is a 700mm long metal infill profile or seal that performs very effectively as a vermin proofing, ember seal and weather seal all in one.

Eaveseal blocks pests and vermin like Mice, Rats, Possums, Frogs, Snakes and Lizards. Eaveseal Mesh deters the entry of embers or sparks in to the roof space during fires. Help achieve BAL  Bushfire Attack Levels by sealing with Eaveseal Mesh. Eaveseal also deflects wind and rain in periods of poor weather.

Perforated Eave Vent and Corrugated Mesh Seal

It is available in corrugated profile and manufactured from 777mm long 0.56 gauge aluminium sections for Colorbond or Zincalume roofs or from 0.48 gauge galvanised mesh for GAL roofs. It can also be supplied for 21mm deep corro roof profiles like Accent 21. 

See Houseseal for Domestic profile sheeting like Trimdek, Corro and Custom orb.

Find out how to install this product

Shipping Notice
Shipping for these products is as follows.
NSW, VIC & QLD $60
SA & TAS $70
WA $100 and NT $125

They travel by TOLL Road and their on-forwarders or occasionally with Australia Post. Some locations may be deemed inaccessible by the freight network and will require collection from a regional depot.

Please do not short your order.
Minimum Order Quantities Apply.
Requests for small orders cannot be completed.

Retroseal Eaveseal is currently available for the underside of the  following profiles.
For the top of these sheet profiles, see Ridgeseal instead.

  • Stramit – Longspan
  • Bluescope Lysaght – Spandek
  • Metroll – Metrospan
  • Apex – Apspan
  • Stratco – Smartspan
  • Fielders
  • QSteel

Other profiles are possible so please contact us if you do not see the sheeting profile you require. Download instructions about how metal profiles work

So that we can provide the best fitting of profiles we require the pitch of the roof line you are sealing. Please email or call us if you require assistance with ordering Eaveseal. Any pitch is available, call or email if you need the roof pitch “other”.

FREQUENTLY ASKED QUESTIONS

Orders placed incorrectly or being returned or exchanged have a 10% restocking charge. The cost of return freight is borne by the purchaser.


If replacements are being shipped a minimum re-delivery charge of $40.00 will apply to the replacement order plus any additional price difference between products will be added or subtracted accordingly.


Change of mind returns for Vermin seals of some varieties will be considered on a case-by-case basis and by prior arrangement. They attract a 20% restocking charge plus the actual cost of the original freight will be deducted. The cost of return freight is borne by the purchaser who is returning the products.

Unfortunately, our manufacturing arrangements mean we have to order in quantities of 18.28m or more. This is why the quantities are listed as such on the website. Don’t short your order, please.

Our Vermin & Emberseal manufacturer does not operate pickup or maintain any payment facilities at the factory. Orders online are delivered directly to you in most circumstances.

We have a wide range of retroseals suitable for installing on sheds that are already built. Vermaseal itself is for installation during the build.

Vermin seals are shipped via TOLL and sometimes Australia Post

Vermin and ember seal products– usually despatched within 3-5 working days. Orders placed incorrectly or being returned or exchanged have a 10% restocking charge. The cost of return freight is borne by the purchaser. A minimum re-delivery charge of $38.00 will apply to the replacement order plus any additional price difference between products.

It is always best to order slightly more than you need as the Minimum Order Quantity for vermin & ember seals is 18m. This min qty is not set by us, it is set by the factory. So if you don’t order enough then you would be up for another lot of freight and potentially the minimum order of 18m. You can always email or call if you need special assistance calculating how much vermin/ember seal you need.

For how to install ShedBlog-supplied products go here – https://shedblog.com.au/how-to-install-shed-products/

It’s possible, it can be a little more fiddly, While many of the retroseals would suit, the product Combination Seal is the best for already insulated sheds and shed homes.

Send us your details at admin@shedblog.com.au and we can arrange a sample. Please also let us know what you need to achieve just in case we can suggest a better product for the job.

Find our product install guides here. It’s usually due to an incorrect installation method or ordering the wrong profile. Please send a photo of the situation. Remember! Superseal installs at approximately a 30- 45 deg angle so please fix a receiver strip in place first, place the clip onto the strip and check fit that way. Instructions are either attached to the box or inside the box.

This depends on the profile of your shed cladding and the purpose (vermin and or embers) Have a look at our cladding guide which can help you to know what works for your shed.

Australia! Northern Rivers, NSW

Any questions? 
check out THE comprehensive FAQ page

or contact our customer service team now on 0456 729 904 
or email us at 
admin@shedblog.com.au