The Steel Shed Barge BAL flashing is a 0.55 metal channel flashing with an embedded 350°C high-temperature Rockwool fire-resistant insert so that when the profiled wall sheet is compressed into it, on the end gable wall, under the barge cap it gives it an effective seal and meets the B.A.L requirement.

This new innovative method completes the previously unsealed gable end wall sheets in your steel building. When you shed is constructed the end walls are capped with a barge cap. If your installer is extremely well-skilled and builds to very precise measurements then the end walls may be sealed to less than 3 mm gaps. To make this simpler, to provide both a during construction and retrofit option we collaborated with Campbell Shed Products to bring to market the BAL flashing for the tops of wall sheeting. This is a very valuable addition to the range of bushfire product

How to buy
Minimum order is 6 x 2.4 lengths or 14.4m. Select the appropriate combination of packs to achieve your goals. If known nominate the brand of shed and the name of your wall sheeting. Only available in Zincalume. Delivery added during check out = $30.

Find out how to install this product

Please refer to this cladding guide to help you order the right product for your shed.

** For buildings that have to meet the Australian Standard Bushfire Attack Level regulations, it is the responsibility of the installer to be aware of these requirements and to identify and close any gaps that exceed 3mm**

Please do not short your order.
Minimum Order Quantities Apply.
Requests for small orders cannot be completed.

Shipping Notice
Shipping for these products is as follows.
NSW, VIC & QLD $60
SA & TAS $70
WA $100 and NT $125

They travel by TOLL Road and their on-forwarders or occasionally with Australia Post. Some locations may be deemed inaccessible by the freight network and will require collection from a regional depot.

FREQUENTLY ASKED QUESTIONS

Orders placed incorrectly or being returned or exchanged have a 10% restocking charge. The cost of return freight is borne by the purchaser.


If replacements are being shipped a minimum re-delivery charge of $40.00 will apply to the replacement order plus any additional price difference between products will be added or subtracted accordingly.


Change of mind returns for Vermin seals of some varieties will be considered on a case-by-case basis and by prior arrangement. They attract a 20% restocking charge plus the actual cost of the original freight will be deducted. The cost of return freight is borne by the purchaser who is returning the products.

Unfortunately, our manufacturing arrangements mean we have to order in quantities of 18.28m or more. This is why the quantities are listed as such on the website. Don’t short your order, please.

Our Vermin & Emberseal manufacturer does not operate pickup or maintain any payment facilities at the factory. Orders online are delivered directly to you in most circumstances.

We have a wide range of retroseals suitable for installing on sheds that are already built. Vermaseal itself is for installation during the build.

Please refer to this cladding guide to help you order the right product for your shed.

Vermin seals are shipped via TOLL and sometimes Australia Post

Vermin and ember seal products– usually despatched within 3-5 working days. Orders placed incorrectly or being returned or exchanged have a 10% restocking charge. The cost of return freight is borne by the purchaser. A minimum re-delivery charge of $38.00 will apply to the replacement order plus any additional price difference between products.

It is always best to order slightly more than you need as the Minimum Order Quantity for vermin & ember seals is 18m. This min qty is not set by us, it is set by the factory. So if you don’t order enough then you would be up for another lot of freight and potentially the minimum order of 18m. You can always email or call if you need special assistance calculating how much vermin/ember seal you need.

If you’re not sure of your roof pitch, take a look at our handy calculator to work it out.

For how to install ShedBlog-supplied products go here – https://shedblog.com.au/how-to-install-shed-products/

It’s possible, it can be a little more fiddly, While many of the retroseals would suit, the product Combination Seal is the best for already insulated sheds and shed homes.

Send us your details at admin@shedblog.com.au and we can arrange a sample. Please also let us know what you need to achieve just in case we can suggest a better product for the job.

Find our product install guides here. It’s usually due to an incorrect installation method or ordering the wrong profile. Please send a photo of the situation. Remember! Superseal installs at approximately a 30- 45 deg angle so please fix a receiver strip in place first, place the clip onto the strip and check fit that way. Instructions are either attached to the box or inside the box.

This depends on the profile of your shed cladding and the purpose (vermin and or embers) Have a look at our cladding guide which can help you to know what works for your shed.

Australia! Northern Rivers, NSW

Any questions? 
check out THE comprehensive FAQ page

or contact our customer service team now on 0456 729 904 
or email us at 
admin@shedblog.com.au