These specially designed vents are great for underfloor, in-wall and to fit ventilation of your steel, cement, brick or timber building. FV VENTS addresses the problem of how we vent the structure neatly when we have colour and design considerations and desire a quality professional finish. These vents work especially well when installing a subfloor vent onto modern cladding profiles with low-profile ribs or flat tray designs. They are particularly suited to the following architectural wall and roofing claddings:

• Lysaght — Panelrib, and Zenith range profiles including Longline, Enseam, Imperial, Dominion, and Baroque
• Stramit— Sharpline, Premier 300, and Monopanel
• Metroll — MAC Nail Strip, MAC Snap Lock, MAC Standing Seam, and Interlocking Panel
• Stratco — Nailstrip Hiland Tray and Snaplock Hiland Tray

These vent plates are available in Zincalume, Galvanised (Gal), Colorbond and for Stainless Steel call us. Vents come supplied with pop rivets and spark excluding mesh for BAL purposes.

The Corro Mount Plate is great for deterring the build up of spider webs around mountings on corro walls. Also available for Trimdek high profile walls here

We also have punched corro vent plates available, and if you need 100+ mount plates simply call us to arrange supply.

IDEAL FOR VENTING

• Sub-Floors
• Subfloor areas
• Exhaust Fans
• Bathroom Exhaust
• Kitchen Exhaust Fan
• Air Flow
• Gas build up vents
• Chemical sheds and buildings
• Ceilings
• Generator Sheds
• Feed sheds
• Much more!

NEW ZEALAND – Corro mount plates and vents will work satisfactorily with standard corrugated profile in NZ that has a 762 mm cover. Colours differ so please see standard colours at www.colorbond.com and choose a close match or select a colour suitable to repaint.

Suits Corro with a depth of up to 18mm , more that 18mm contact us first.
During check out, on the Shipping & Delivery page select location as New Zealand at the top. This will add the required standard air freight and packing to the order.

** You may split colours by telling us in the notes box when buying. These mounts plates have a minimum quantity order which is 6. Please make sure you order enough as we cannot ship extras later unless it is in an order of 6 or more. Selecting GAL (Silver/Grey) over-rides other colour selections. If you need custom size mount plates email admin@shedblog.com.au

# for best fit with some low profile cladding like multiclad and Kpanel it helps to notch the edge of the vent plates.

PEOPLE ALSO ASK

Do these vents come in Zincalume?

Yes, these vents come in Colorbond, Zincalume and also can be done in a Galvanised finish for use on galvanised cladding.

Can I mix sizes and colours for corro mount vents?

Yes, you can mix the colours of vents if writing that in the order box provided when ordering.

For Mixed Sizes and colours – email your request to admin@shedblog.com.au with your requirements, your shipping address and colours and sizes and Shedblog will email you an electronic invoice.

What is the minimum order for corro mount vents?

Minimum Order for Corro Mount Vents = 6 pack

Make sure to describe the orientation of the vent and the orientation of your sheeting, especially when ordering rectangular plates or vents.

Our manufacturer has set a minimum order quantity of 6. With 24 different colours and up to 6 various shapes, that’s 144 x 6 = 864 plates that would need to be made just to keep 6 or each colour on the shelf. The economics of the plates, given they are processed by hand at the machines means that 6 is the minimum order quantity available.

A majority of our buyers are electricians and they often have use for more. You can split colours and sizes ordering by email should that assist you to hit a qty of 6. You can also add in corro vents plates to make it up to six.

What are OAL - Wall Louvre Vents?

These are our larger ventilation solution for sheds, warehouses, factories, workshops etc. Colorbond Steel Vents are shipped to site in most circumstances subject to your location, orders to remote sites may be refused and refunded, if in doubt enquire before ordering.

ANY QUESTIONS? CHECK OUT THE COMPREHENSIVE FAQ PAGE
OR CONTACT OUR CUSTOMER SERVICE TEAM NOW admin@shedblog.com.au