Seal your shed, home or shed home against burning bushfire embers, sparks, birds and vermin with Retroseal Roofseal

Roofseal is an all-steel, two-piece flashing that fits under the overhanging roof sheet and behind the gutter. It acts as a vermin seal and an ember barrier under the roof sheet where the wall and roof profiles are open. Installed correctly this bushfire and vermin seal will help prevent flying embers from entering the shed through the gaps, behind the gutters.

Roofseal also controls gutter overflow into the building in storms or where the gutter is blocked. Most importantly as a shield to help prevent burning embers from entering the building through the open profiles when leaves and debris in the gutter catch fire during the fire season. Helps protect the shed and gain a BAL level against ember attack.

It is now available in Colorbond colours and Zincalume.

OPTIONAL FASTENER KITS
Fastener kits are now available for Retroseal Roofseal.
Each pack contains tek screws, and a tek screw driver to match your Retroseal Roofseal quantity.
The Small Pack suits up to 32.76m
The Medium Pack suits up to 61m
The Large Pack suits up to 122m
Please drop us a note in the comments section of your checkout with your wall sheeting colour so we can colour code your tek screws.
These kits will be delivered separately to your Retroseal Roofseal!

Find out how to install this product

Please refer to this cladding guide to help you order the right product for your shed.

If you're not sure of your roof pitch, take a look at our handy calculator to work it out.

Shipping Notice
Shipping for these products is as follows.
NSW, VIC & QLD $60
SA & TAS $70
WA $100
NT – Please email us at admin@shedblog.com.au

They travel by TOLL Road and their on-forwarders or occasionally with Australia Post. Some locations may be deemed inaccessible by the freight network and will require collection from a regional depot.

Please do not short your order.
Minimum Order Quantities Apply.
Requests for small orders cannot be completed.

2 different roofseal profiles and wall seal trim

All roof pitches can be catered for, simply enter the amount in degrees on the right. Packs include two flashing strips (the wall cap & roof profile).

Suits Corrugated, Custom Orb, Corro, Accent 21, Trimdek, Trimclad, Monoclad on roof or walls or a mix of the types. Indicate the types when you are ordering.

FREQUENTLY ASKED QUESTIONS

Orders placed incorrectly or being returned or exchanged have a 10% restocking charge. The cost of return freight is borne by the purchaser.


If replacements are being shipped a minimum re-delivery charge of $40.00 will apply to the replacement order plus any additional price difference between products will be added or subtracted accordingly.


Change of mind returns for Vermin seals of some varieties will be considered on a case-by-case basis and by prior arrangement. They attract a 20% restocking charge plus the actual cost of the original freight will be deducted. The cost of return freight is borne by the purchaser who is returning the products.

Unfortunately, our manufacturing arrangements mean we have to order in quantities of 18.28m or more. This is why the quantities are listed as such on the website. Don’t short your order, please.

Our Vermin & Emberseal manufacturer does not operate pickup or maintain any payment facilities at the factory. Orders online are delivered directly to you in most circumstances.

We have a wide range of retroseals suitable for installing on sheds that are already built. Vermaseal itself is for installation during the build.

Please refer to this cladding guide to help you order the right product for your shed.

Vermin seals are shipped via TOLL and sometimes Australia Post

Vermin and ember seal products– usually despatched within 3-5 working days. Orders placed incorrectly or being returned or exchanged have a 10% restocking charge. The cost of return freight is borne by the purchaser. A minimum re-delivery charge of $38.00 will apply to the replacement order plus any additional price difference between products.

It is always best to order slightly more than you need as the Minimum Order Quantity for vermin & ember seals is 18m. This min qty is not set by us, it is set by the factory. So if you don’t order enough then you would be up for another lot of freight and potentially the minimum order of 18m. You can always email or call if you need special assistance calculating how much vermin/ember seal you need.

If you’re not sure of your roof pitch, take a look at our handy calculator to work it out.

For how to install ShedBlog-supplied products go here.

It’s possible, it can be a little more fiddly, While many of the retroseals would suit, the product Combination Seal is the best for already insulated sheds and shed homes.

Send us your details at admin@shedblog.com.au and we can arrange a sample. Please also let us know what you need to achieve just in case we can suggest a better product for the job.

Find our product install guides here. It’s usually due to an incorrect installation method or ordering the wrong profile. Please send a photo of the situation. Remember! Superseal installs at approximately a 30- 45 deg angle so please fix a receiver strip in place first, place the clip onto the strip and check fit that way. Instructions are either attached to the box or inside the box.

This depends on the profile of your shed cladding and the purpose (vermin and or embers) Have a look at our cladding guide which can help you to know what works for your shed.

Australia! Northern Rivers, NSW

Any questions? 
check out THE comprehensive FAQ page

or contact our customer service team now on 0456 729 904 
or email us at 
admin@shedblog.com.au