Retroseal Roofseal
Seal your shed, home or shed home against burning bushfire embers, sparks, birds and vermin with Retroseal Roofseal
It is now available in Colorbond colours and Zincalume.
Fastener kits are now available for Retroseal Roofseal.
Each pack contains tek screws, and a tek screw driver to match your Retroseal Roofseal quantity.
The Small Pack suits up to 32.76m
The Medium Pack suits up to 61m
The Large Pack suits up to 122m
Please drop us a note in the comments section of your checkout with your wall sheeting colour so we can colour code your tek screws.
These kits will be delivered separately to your Retroseal Roofseal!
Find out how to install this product Please refer to this cladding guide to help you order the right product for your shed. If you're not sure of your roof pitch, take a look at our handy calculator to work it out. |
Please do not short your order. Minimum Order Quantities Apply. Requests for small orders cannot be completed. |
NT - Please email us at admin@shedblog.com.au
How to install vermin seals?
For how to install ShedBlog-supplied products go here - https://shedblog.com.au/how-to-install-shed-produc...
Can I exchange my vermin and ember seal order?
Can I order a piece or two of vermin proofing if I'm short?
Unfortunately, our manufacturing arrangements mean we have to order in quantities of 18.28m or more. This is why the quantities are listed as such on the website. Don't short your order please.
Can I pick up my vermin or ember seals order?
Our Vermin & Emberseal manufacturer does not operate pickup or maintain any payment facilities at the factory. Orders online are delivered directly to you in most circumstances.
Can I still install a vermin seal after the shed is built?
We have a wide range of retroseals suitable for installing on sheds that are already built. Vermaseal itself is for installation during the build.
How do you transport my purchase?
Vermin seals are shipped via TOLL and sometimes Australia Post
How long does it take to manufacture my order?
Vermin and ember seal products– usually despatched within 3-5 working days. Orders placed incorrectly or being returned or exchanged have a 10% restocking charge. The cost of return freight is borne by the purchaser. A minimum re-delivery charge of $38.00 will apply to the replacement order plus any additional price difference between products.
How much vermin seal should I order?
It is always best to order slightly more than you need as the Minimum Order Quantity for vermin & ember seals is 18m. This min qty is not set by us, it is set by the factory. So if you don’t order enough then you would be up for another lot of freight and potentially the minimum order of 18m. You can always email or call if you need special assistance calculating how much vermin/ember seal you need.
Is it possible to install vermin seals with my insulated shed?
It's possible, it can be a little more fiddly, While many of the retroseals would suit, the product Combination Seal is the best for already insulated sheds and shed homes.
May I ask for product samples?
Send us your details at admin@shedblog.com.au and we can arrange a sample. Please also let us know what you need to achieve just in case we can suggest a better product for the job.
My Retroseal Superseal is not Fitting. How to resolve this?
Find our product install guides here. It’s usually due to incorrect installation method or ordering the wrong profile. Please send photo of the situation. Remember! Superseal installs at approximately a 30- 45 deg angle so please fix a receiver strip in place first, and place clip onto strip and check fit that way. Instructions are either attached to the box or inside the box.
What Vermin seal profile code is best for my shed?
This depends on the profile of your shed cladding and the purpose (vermin and or embers) Have a look at our cladding guide which can help you to know what works for your shed.
Where is Vermaseal made?
Australia! Northern Rivers, NSW
How to calculate my roof pitch?
If you’re not sure of your roof pitch, take a look at our handy calculator to work it out.
How do I identify my wall or roof profile?
Please refer to this cladding guide to help you order the right product for your shed.
ANY QUESTIONS? CHECK OUT THE COMPREHENSIVE FAQ PAGE
OR CONTACT OUR CUSTOMER SERVICE TEAM NOW ADMIN@SHEDBLOG.COM.AU
Any questions?
check out THE comprehensive FAQ page
or contact our customer service team now on 0456 729 904
or email us at admin@shedblog.com.au