Corro Mount Plates

00075
AU$190.00
In stock
1
Product Details

Corro Mount Plates address the all to common problem of no flat surface when mounting your fittings onto a corrugated or Custom Orb wall. Works with all standard Custom Orb and corro profiles (not mini orb) . These plates are available in Zincalume, Galvanised (Gal), Colorbond, and Stainless Steel(call us). Minimum order quantities of 6 plates applies **
They can be set for 21mm deep corrugations. Tick the 21mm check box if required.

Mount Plates for Trimdek, Monoclad walls available now here.

Standard Corro Mount Plates are available in:

  • 150 x 150mm Square
  • 250 x 250mm Square
  • 300 x 300mm Square
  • 400 x 400mm Square
  • 150mm (2 corrugations) x 300mm wide
  • 300mm (4 corrugations) x 150mm wide

Shipping in Australia – $30 added during check out.
We can ship these to New Zealand see notes below.

The Corro Mount Plate is great for deterring the build up of spider webs around mountings on corro walls. Also available for Trimdek high profile walls here

We also have punched corro vent plates available, and if you need 100+ mount plates simply call us to arrange supply.

IDEAL FOR MOUNTING

  • Power Points
  • GPO
  • Switches
  • Handles
  • Hooks and Hoops
  • Smoke detectors
  • Lights and Lamps
  • Downlights
  • Ceiling Fans, Vents
  • Taps, Nozzles,
  • Water, Gas, Electrical Pipes
  • Much more!

NEW ZEALAND – Corro mount plates and vents will work satisfactorily with standard corrugated profile in NZ that has a 762 mm cover. Colours differ so please see standard colours at www.colorbond.com and choose a close match or select a colour suitable to repaint.
Suits Corro with a depth of up to 18mm, if more than 18mm deep contact us first.
They can be set for 21mm deep corrugations. Tick the 21mm check box if required.
During checkout, on the Shipping & Delivery page, select the location as New Zealand at the top. This will add the required standard air freight and packing to the order. ($88.00)

** You may split colours by telling us in the notes box when buying. These mounts plates have a minimum quantity order which is 6. Please make sure you order enough, as we cannot ship extras later unless it is in an order of 6 or more. Selecting GAL (Silver/Grey) over-rides other colour selections. If you need custom-size mount plates, email admin@shedblog.com.au

FREQUENTLY ASKED QUESTIONS

How do you ship and manufacture corro mount plates?
Manufacture time – Normal manufacture time is two full working days if shelf stock is not on hand.
Shipping is usually on a Tuesday and a Thursday. Orders received Fri, Sat, Sun may ship Tuesday and orders Tuesday and Wednesday may ship on Thursday. Orders usually ship standard post or if with a bigger order, TOLL Road. Express Post is not offered.
Can I use Corro Mount Plates in a different way?

Corro mount plates have a variety of uses, the only limit is your imagination. See our post about Taffy the cat and her new cat door.

I don't need a pack, can I order individual High Profile Mount Plates?

Unfortunately, due to factory-driven costs and logistics, they are only available in pack sizes of 6 or more.

Can I mix sizes and colours for corro mount plates?

Yes – For Mixed colours with the same size CMP, simply enter the variety of colours in the provided text box and how many of each when first placing the order before clicking add to cart.

What is the minimum order for corro mount plates?

Minimum Order for Corro Mount Plates = 6 pack


ANY QUESTIONS?
CHECK OUT THE COMPREHENSIVE FAQ PAGE

OR CONTACT OUR CUSTOMER SERVICE TEAM NOW ADMIN@SHEDBLOG.COM.AU

Save this product for later

Any questions? 
check out THE comprehensive FAQ page

or contact our customer service team now on 0456 729 904 
or email us at 
admin@shedblog.com.au