How to Fix Your Hot Water System in Adelaide – A Short Guide
It can be tough to spend a day with a malfunctioning hot water system. Without hot water, your day comes to a standstill. You cannot think about washing dishes in the cold, let alone taking a shower.
Your first course of action is to call an emergency plumber, right? However, don’t forget the cost and time it would take for a repair job that you can easily do yourself. And if you’re doing it on your own, we’ve got you covered.
In this guide, we’ll cover troubleshooting steps, when to DIY, when to call in a pro, and how to prevent hot water problems in the future.
How to Fix Common Problems of Hot Water Systems in Adelaide
No Hot Water? Try This First
The first thing you have to do is to check if the thermostat is working properly. It must be around 60°C. Fixing the thermostat alone might solve your problem without going further.
Running Out of Hot Water Too Quickly?
If you have a gas system, check if the pilot light is working properly and check the busted heating element in case of an electric storage hot water system. Think about when you last upgraded your system – maybe it’s time for an upgrade.
Inconsistent Water Temperature
One moment, the water is pleasantly warm, and the next moment, you are hit by a burst of freezing water. A broken thermostat, mixing valve issues, or a blocked inline filter could be causing the fluctuations. A quick check and fix could bring back consistent hot water.
Bad Smell, Discoloured, or Cloudy Water
Try flushing your tank. Often, hot water systems give a rotten egg smell due to sediment buildup. Also, check if the anode rod inside your system is corroded. Replace it to improve your water quality and colour.
Leaking System
A dripping pressure relief valve may simply need a quick replacement. But if your tank is rusty or corroded, it’s a sign your system is on its last legs. Pipe leaks? Tighten connections or replace faulty pipes before they cause major damage.
When to DIY vs. When to Call a Plumber
Go for the DIY Fix If:
- You’re adjusting the thermostat.
- You’re flushing the system.
- You’re cleaning inline filters.
Call a Pro If:
- There’s a gas issue (leave it to the licensed experts).
- Your system has major leaks or isn’t working at all.
- You need an upgrade or replacement.
How to Keep Your Hot Water System Running Smoothly
Regular maintenance can prevent headaches down the line. Flush your tank every 6–12 months to avoid sediment buildup. Replacing the anode rod every few years can help prevent corrosion. Checking the tempering valve and getting an annual service check-up can keep everything running smoothly.
If the problem persists, call the experts for the hot water system in Adelaide.
Your System Might Need an Upgrade
It is possible that your system just needs an upgrade; there’s no chance of repair now. Getting an old system repaired will make it inefficient again, and you will need to cover the repair costs repeatedly. It’s better to get a solar hot water system and save on your energy bills. Heat pump water heaters are also a great option in that case.
Maintain Hot Water Systems Regularly
Dealing with a dodgy hot water system? Don’t wait until it completely gives out. Regular maintenance can prevent hot water problems, and knowing when to fix it yourself and when to call in a pro can save you time and money.
If your hot water issues won’t go away, don’t take matters into your own hands. Get help from a professional who can get to the root of the issue and fix it. After all, quick fixes can only last so long.
Need help now? Call Anytime Plumbing Adelaide today.
