REFERENCE # : 2204141


The ShedBlog has launched a course on the Teachable platform that will help shed buyers avoid making costly mistakes when buying a shed. Enroll here.

REFERENCE # : 2204141

Details of this Shed 

Weight – Approximately: 7,900 kg
Span – 5 metres
Length – 16 metres (4 Bays of 4 metres each)
Height – 5 metres
Roof Type – Gable, 22.5 degree pitch
Roof – COLORBOND® steel CORODEK® 0.42 BMT (0.47TCT) sheeting, BlueScope
Walls & Trims – COLORBOND® steel TRIMCLAD® 0.42 BMT (0.47TCT) sheeting, BlueScope
Gutters – Big M Gutter. Nominal downpipe spacing = 4m.
Roller Doors – Two (2) COLORBOND® steel 2.15m high x 2.6m wide roller doors (roller door is wind rated). Two (2) COLORBOND® steel 3m high x 2.6m wide roller doors (roller door is wind rated). Refer to the General Specification (# Access Doors) in relation to opening sizes. The Roller Doors are boxed or steel wrapped for protection during transport.
PA Doors – Four (4) 2040h x820w COLORBOND® steel doors. Single skin metal clad door with COLORBOND® steel facings and fold-down vertical sides for strength and appearance. On a welded RHS frame, the door is pre-hung into a powdercoated frame. Supplied with a Knob/Knob entrance set;
Window Openings – Materials to frame up for window opening(s) including a header flashing to suit Eight (8) 900h x1200w windows (supply of the window is NOT included).
Dividing Walls – Two (2) running across the span of the building. COLORBOND® steel TRIMCLAD® 0.42 BMT (0.47TCT) sheeting.
Roof Ventilators – 4 x 300mm Ventilator(s) (same colour as roof).
Open Bays – Four (4) 4m open bays – along the sides of the steel building. Refer to Layout (attached) for location & height clearances.
Bracing – The building will have Knee and Apex braces. Minimum internal knee clearances are: Main Building 4.547m. Minimum internal apex clearance is: 5.340m.
Left Lean-to
Span – 3m
Drop – 1.4 metres from eave height
Pitch – 10 degrees
Length – Starting bay 1 for 4 bays
Height of External Lean-to wall – 3.07m
Leanto is fully sheeted.
Right Lean-to
Span – 2m
Drop – 1.4 metres from eave height
Pitch – 10 degrees
Length – Starting bay 1 for 4 bays
Height of External Lean-to wall – 3.25m
Four (4) 4m open bays – along the sides of the leanto. Two (2) 2m open bays on the ends of the leanto. Refer to Layout (attached) for location & height clearances.
Mezzanine – Two (2) bays, starting at bay One (1). Height under joist to be 2.6m, with a clearance under the bearer of 2.3m. Steel bearers and joists only. Bearers supported by Zero (0) to One (1) mid columns. Stairs, balustrading and timber flooring supplied by others. Allowable floor load is 3.0kPa uniformly distributed. (Suitable for a office for general use or General storage up to 1.2m high – No concentrated loads).
Roof Purlins & Wall Girts – Z sections bolted to rafters & columns with a minimum overlap of 10% of the bay width. Brackets are provided so that the Z is bolted through the web.
Fixing to Concrete – Screw-Bolts fitted after concrete is cured.

Site Design Specifications 

Site – Central Coast QLD 4702 Australia
Building Class – 10
Importance Level – 2 with a Vr of 69.3 m/s
Design Wind Criteria – Region C; TC = 2.5; Mt = 1; Ms = 1; giving a Vdes of 57.3 m/s.
Other Design Factors – No Snow Loading allowed. No Earthquake Loading allowed.


Kit Price – $56,709.09
GST – $5,670.91
Delivery – FREE*
Promotional Discount (Kick Off Shed Sale) – ($4,680.00)
TOTAL (inc GST) – $57,700.00
* subject to standard delivery area

REFERENCE # : 2204141

Specific Inclusions

  • Determination of the design criteria by the engineer. This includes assessment in 8 cardinal directions to determine the site design wind speed based on the building orientation.
  • A comprehensive step by step Construction Kit. This kit is specific to your building and gives step by step, simple to follow instructions on how to build your building.
  • Engineering certification of the steel building to the appropriate Australian Standards.
  • Slab or Pier designs for soil classes A, S, M, H1 and H2.
  • Materials, as nominated above, supplied as per the attached General Specification”.
  • BlueScope – product warranties of up to 15 years apply.

Specific Exclusions

  • Drawings, other than detailed above.
  • Consent authority including any building, development or construction certificate application(s).
  • Construction of the steel building and any foundations (the building is supplied as a kit).
  • Insurance of the steel building once delivered to site or collected from the depot.