REFERENCE # : 2208116-1
BUY A SHED COURSE:
The ShedBlog has launched a course on the Teachable platform that will help shed buyers avoid making costly mistakes when buying a shed. Enroll here.
REFERENCE # : 2208116-1
Details of this Shed
Weight – Approximately: 4,100 kg
Span – 8.5 metres
Length – 21 metres (6 Bays: 3.5 metres, 3.5 metres, 4 metres, 4 metres, 3 metres, 3 metres)
Height – 3.3 metres
Roof Type – Gable, 10 degree pitch
Roof – COLORBOND® steel TRIMCLAD® 0.42 BMT (0.47TCT) sheeting, BlueScope
Walls & Trims – COLORBOND® steel TRIMCLAD® 0.42 BMT (0.47TCT) sheeting, BlueScope
Gutters – 115 High Front quad gutter – Unslotted . Nominal downpipe spacing = 4m.
Roller Doors – Two (2) COLORBOND® steel 2.87m high x 2.75m wide roller doors (roller door is wind rated). Door height will necessitate a manual system (by owner) to reach the top of the door for opening and closing. Refer to the General Specification (# Access Doors) in relation to opening sizes. The Roller Doors are boxed or steel wrapped for protection during transport.
PA Doors – Two (2) 2040h x820w COLORBOND® steel doors. Single skin metal clad door with COLORBOND® steel facings and fold-down vertical sides for strength and appearance. On a welded RHS frame, the door is pre-hung into a powdercoated frame. Supplied with a Knob/Knob entrance set;
Window Openings – Materials to frame up for window opening(s) including a header flashing to suit Eight (8) 900h x1200w windows and One (1) 2100h x1800w glass sliding door (the supply of windows is NOT included).
Dividing Walls – Two (2) running across the span of the building. COLORBOND® steel TRIMCLAD® 0.42 BMT (0.47TCT) sheeting. These walls are structural – it must be installed and cannot be moved at any time.
Open Bays – Four (4) 3m open bays – along the sides of the steel building. Refer to Layout (attached) for location & height clearances.
Open Gable-Ends – Steel building has sheeting as shown whilst the right-end-wall-mullions have been removed. Refer to the Layout attached.
Bracing – The building will have Knee and Apex braces. Minimum internal knee clearances are: Main Building 2.482m. Minimum internal apex clearance is: 3.567m.
Roof Purlins & Wall Girts – Z sections bolted to rafters & columns with a minimum overlap of 10% of the bay
width.
Fixing to Concrete – Screw-Bolts fitted after concrete is cured.
Site Design Specifications
Site – East NSW 2804 Australia
Building Class – 10
Importance Level – 2 with a Vr of 45 m/s
Design Wind Criteria – Region A1; TC = 2.41; Mt = 1; Ms = 1.0; giving a Vdes of 39.5 m/s.
Other Design Factors – No Snow Loading allowed. No Earthquake Loading allowed
Pricing at Oct 2022
Kit Price – $29,081.82
GST – $2,908.18
Delivery – FREE*
Promotional Discount (Early Santa Shed Savings) – ($2,400.00)
TOTAL (inc GST) – $29,590.00
* subject to standard delivery area
REFERENCE # : 2208116-1
Specific Inclusions
- Determination of the design criteria by the engineer. This includes assessment in 8 cardinal directions to determine the site design wind speed based on the building orientation.
- A comprehensive step by step Construction Kit. This kit is specific to your building and gives step by step, simple to follow instructions on how to build your building.
- Engineering certification of the steel building to the appropriate Australian Standards.
- Slab or Pier designs for soil classes A, S, M, H1 and H2.
- Materials, as nominated above, supplied as per the attached General Specification”.
- BlueScope – product warranties of up to 15 years apply.
Specific Exclusions
- Drawings, other than detailed above.
- Consent authority including any building, development or construction certificate application(s).
- Construction of the steel building and any foundations (the building is supplied as a kit).
- Insurance of the steel building once delivered to site or collected from the depot.