REFERENCE # : 2304006
BUY A SHED COURSE:
The ShedBlog has launched a course on the Teachable platform that will help shed buyers avoid making costly mistakes when buying a shed. Enroll here.
REFERENCE # : 2304006
Details of this Shed
Weight – Approximately: 8,600 kg
Span – Main Building: 10 metres
Length – 20 metres (5 Bays of 4 metres each)
Height – 5 metres
Roof Type – Gable, 10 degree pitch
Roof – ZINCALUME® steel TRIMCLAD® 0.42 BMT (0.47TCT) sheeting, BlueScope
Walls & Trims – COLORBOND® steel TRIMCLAD® 0.42 BMT (0.47TCT) sheeting, BlueScope
Gutters – Squareline Gutter – WA Only – Unslotted . Nominal downpipe spacing = 4m.
Roller Doors – Three (3) COLORBOND® steel 4m high x 3.3m wide roller doors (with 3 motorised unit operated by remote handpieces, roller door is not required to be wind rated). One (1) COLORBOND® steel 4m high x 3.5m wide roller door (with 1 motorised unit operated by a remote handpiece, roller door is not required to be wind rated). Refer to the General Specification (# Access Doors) in relation to opening sizes. The Roller Doors are boxed or steel wrapped for protection during transport. Refer to the Building information for details on Industrial Door Handing.
PA Doors – One (1) 920mm wide pre-hung double skin COLORBOND® steel door with keyed lockset and lever handle on both sides;
Window Openings – Materials to frame up for window opening(s) including a header flashing to suit Seven (7) 900h x1800w windows (supply of the window is NOT included).
Skylights – Six (6) sheets of 2400gsm Industrial Grade Translucent (Opal) Fibreglass. Two (2) on left side of steel building roof. Two (2) on right side of steel building roof. Two (2) on right leanto.
Dividing Walls – One (1) running across the span of the building. COLORBOND® steel TRIMCLAD® 0.42 BMT (0.47TCT) sheeting. This wall is structural – it must be installed and cannot be moved at any time.
Roof Ventilators – 3 x 300mm Ventilator(s) (same colour as roof).
Bracing – The building will have Knee and Apex braces. Clearances are subject to the engineer’s final design requirements. Estimated internal knee clearances are: Main Building 3.545m. Estimated internal apex clearance is: 5.334m.
Right Lean-to
Span – 6m
Drop – No drop
Pitch – 06 degrees
Length – Starting bay 1 for 5 bays
Height of External Lean-to wall – 4.37m
Five (5) 4m open bays – along the sides of the leanto. Four (4) 3m open bays on the ends of the leanto. Refer to Layout (attached) for location & height clearances.
Mezzanine – One (1) bay, starting at bay One (1). Height under joist to be 2.6m, with a clearance under the bearer of 2.35m. Steel bearers and joists only. Bearers supported by Two (2) mid columns. Stairs, balustrading and timber flooring supplied by others. Allowable floor load is 3.0kPa uniformly distributed. (Suitable for a office for general use or General storage up to 1.2m high – No concentrated loads).
Roof Purlins & Wall Girts – Z sections bolted to rafters & columns with a minimum overlap of 10% of the bay width.
Fixing to Concrete – Screw-Bolts fitted after concrete is cured.
Site Design Specifications
Site – South West WA 6122 Australia
Building Class – 10
NCC Version – The Engineer to select NCC 2019 or NCC 2022 as a Performance Standard
Design Wind Criteria for the Highest Cardinal Direction – Importance Level 2 with a Vr of 45 m/s; Region A1; TC = 2.5; Mt = 1; Ms = 1; giving a Vdes of 39.2 m/s.
Other Design Factors – No Snow Loading allowed.
Pricing at Apr 2023
Kit Price – $65,272.73
GST – $6,527.27
Delivery – FREE*
Promotional Discount (Beat The Price Rise Before EOFY) – ($5,390.00)
TOTAL (inc GST) – $66,410.00
* subject to standard delivery area
REFERENCE # : 2303158-1
Specific Inclusions
- Determination of the design criteria by the engineer. This includes assessment in 8 cardinal directions to determine the site design wind speed based on the building orientation.
- A comprehensive step by step Construction Kit. This kit is specific to your building and gives step by step, simple to follow instructions on how to build your building.
- Engineering certification of the steel building to the appropriate Australian Standards.
- Slab or Pier designs for soil classes A, S, M, H1 and H2.
- Materials, as nominated above, supplied as per the attached General Specification”.
- BlueScope – product warranties of up to 15 years apply.
Specific Exclusions
- Drawings, other than detailed above.
- Consent authority including any building, development or construction certificate application(s).
- Construction of the steel building and any foundations (the building is supplied as a kit).
- Insurance of the steel building once delivered to site or collected from the depot.