Planning Side Access: Why Your Home Design Matters Before Building on Your Block

For many homeowners, having space for a shed, caravan, boat or workshop is part of the plan when buying land and building a house. However, one detail that can easily be overlooked during the design stage is side access. A block might appear wide enough on paper, but once the house, garage, setbacks and other structures are positioned, there may be little room left to move a vehicle or equipment down the side of the property.
This is why side access needs to be considered before settling on a house design. It is not simply a matter of leaving enough room for landscaping or installing a wider gate after construction. The position and footprint of the house determine how much usable space remains between the building and the boundary.
For homeowners who intend to add a shed, store a caravan or keep a boat on their property, planning this space early can prevent costly adjustments and limitations later.
Why Side Access Is a House Design Decision
Side access is often treated as something that can be arranged once the house is built. In reality, it is largely determined by decisions made during the initial design and site planning stages.
When a home is positioned on a block, its width, garage placement, wall alignment and required setbacks all affect the remaining space along the sides. If the house occupies most of the available width, the leftover gap may only be suitable for walking, bins or garden maintenance.
This distinction matters when a homeowner wants to move a caravan, trailer or boat into the backyard. A narrow pedestrian passage is very different from a clear vehicle access route.
Once the house has been built, creating additional space can be difficult. Moving a fence or changing a gate might improve access slightly, but it will not solve a problem caused by the building footprint itself.
Homeowners should therefore identify how they intend to use their outdoor space before choosing a floor plan. If a future shed or vehicle storage area is part of the plan, the house should be positioned with that requirement in mind.
How Much Side Access Is Actually Needed?
The amount of space required depends on what needs to pass through it. A pathway for people and garden equipment has very different requirements from an access route for a caravan or boat.
A standard trailer may fit through a relatively narrow opening, depending on its overall width and the towing vehicle. A caravan requires more consideration because its body, external fittings and towing vehicle all affect the clearance needed.
Under Australian vehicle standards, caravans and trailers are generally subject to a maximum allowable width of 2.5 metres. However, this is a legal vehicle dimension, not a recommended side access width for a residential property. A passage that is only slightly wider than the caravan can leave very little room for steering adjustments.
For practical planning, homeowners should consider the following:
- Pedestrian access: A narrow gap may be sufficient for walking, bins and basic garden maintenance, but it is not suitable for moving larger vehicles.
- Standard trailer access: The trailer’s actual width, towing vehicle and turning requirements should be measured before deciding on a gate opening.
- Caravan access: A clear passage of around 3 metres may be a useful starting point for assessment, although the required width depends on the caravan, towing vehicle and approach angle.
- Boat storage: Boat trailers may require additional room for manoeuvring, particularly when the access route involves a turn or a narrow entrance.
- Tandem trailers and larger setups: Longer combinations need sufficient space to travel through the side passage and reach the intended parking or storage area without difficult reversing movements.
Gate width is only one part of the calculation. Homeowners should account for gate posts, hinges, fence lines, roof eaves, downpipes and other projections that reduce the actual clearance. Overhead clearance should be checked as well, especially for taller caravans and boats carried on trailers.
The most reliable approach is to measure the vehicle that will use the access route and have the builder assess its turning path against the proposed site plan. A gap that looks adequate on a floor plan may be difficult to use once the surrounding structures are taken into account.
How Block Width and House Design Work Together
A wider block does not automatically guarantee good side access. The house design and its position on the property are just as important.
For example, consider a 12.5-metre-wide block. A house design with a wide garage, larger living areas extending across the frontage and minimal space between the side wall and boundary may leave very little room for vehicle access.
On the other hand, a narrower block may still provide a usable side passage if the floor plan has been designed to accommodate the available width. The placement of the garage, bedrooms and living areas can make a difference to how much open space remains along one side.
This is why homeowners should compare the actual building footprint against the dimensions of their land rather than relying on the advertised block width alone.
It is equally important to check whether the proposed design can be positioned to preserve a continuous access route from the front boundary to the backyard. A passage that becomes narrower halfway down the property may not be useful for moving a caravan or trailer.
Before choosing a floor plan, request a site-specific layout showing the house, garage, boundary lines and proposed access space. This provides a clearer picture of what will remain available after construction.
Setbacks, Easements and Other Things That Reduce Access
Even when the house appears to leave enough room on one side, other site conditions can affect the usable width.
Building setbacks determine how close certain parts of a house can be positioned to the property boundary. These requirements depend on the applicable planning controls, lot conditions and building design. In Western Australia, the Residential Design Codes (R-Codes) provide planning and design requirements for residential development, including provisions relating to building placement and access.
Easements can create further restrictions. An easement may reserve part of the property for drainage, sewerage, utilities or access. Although the area may look like available space, restrictions may affect what can be built or installed there.
Other details that homeowners should consider include:
- Meter boxes and utility connections: These can reduce the available passage or interfere with gate placement.
- Air-conditioning units: Outdoor units may project from the house and create an obstruction.
- Downpipes and drainage: These need to be considered when assessing the actual clear width.
- Roof eaves: Overhanging sections can reduce overhead or side clearance.
- Fences and boundary lines: Fence posts, retaining walls and neighbouring structures can affect the usable space.
- Stormwater requirements: Drainage infrastructure may limit where paving, structures or other improvements can be placed.
These details should be identified during site planning rather than treated as minor adjustments after the house is complete. Homeowners should ask their builder to distinguish between the boundary-to-wall measurement and the actual unobstructed width available for vehicle access.
The Trade-Off with Narrow-Lot and Squat-Lot Designs
Narrow-lot and squat-lot home designs can make it possible to build on blocks with different dimensions, but they may involve compromises in outdoor space.
Some narrow-lot designs maximise the available building width to provide larger internal living areas, additional bedrooms or more practical storage. Squat-lot designs, meanwhile, are generally intended for blocks with shorter dimensions and a more square layout.
These designs can work well for homeowners who prioritise internal space. However, the same floor plan may not suit someone who wants to maintain a wide side passage for a caravan, boat or shed.
The trade-off should be considered before signing a building contract. Choosing a design based only on the number of bedrooms or the size of the living area can result in an outdoor layout that does not support the homeowner’s other plans.
Homeowners should compare different floor plans and consider how each one affects the remaining outdoor space. A slightly different garage position or building footprint could make a considerable difference to the side access available.
What to Ask Your Builder Before Signing
Before committing to a house design, homeowners should discuss their side access requirements with the builder. These questions can help identify potential problems before construction begins:
- How much clear side access will remain after the house is positioned? Ask for the actual measurement from the boundary to the nearest obstruction, not just the distance shown between the wall and fence.
- Can the design accommodate a caravan, boat or trailer? Provide the measurements of the vehicle and ask whether it can travel through the proposed access route.
- Can the house footprint or garage position be adjusted? Find out whether an alternative layout could preserve more space along one side of the property.
- Are there setbacks or easements that will affect the access area? Request clarification on planning restrictions, utility locations and drainage requirements.
- Will the gate opening and turning space be wide enough? Check the entrance, gate posts, approach angle and the route leading to the backyard.
- Can the site plan show the intended shed or storage area? If a shed or workshop is part of the long-term plan, discuss its proposed location and access requirements before finalising the design.
For buyers exploring different floor plans, Easystart Homes offers a range of popular Perth home designs suited to different block sizes and lifestyle requirements. Its home design range includes options for compact blocks and larger family homes, while its separate narrow-lot and squat-lot ranges provide additional choices for different site dimensions.
Reviewing these options with a New Home Consultant can help buyers understand which designs may suit their block and the features they want to accommodate. The important point is to communicate any future shed, caravan or boat storage plans early so that side access can be considered alongside the internal layout.
Plan Beyond the House
A home should suit more than the immediate requirements of moving in. For homeowners who want a shed, workshop, caravan bay or boat storage area, the surrounding outdoor space is just as important as the rooms inside.
Side access is difficult to add once the house has been positioned and built. Taking the time to review block dimensions, building footprints, setbacks and vehicle clearances before signing can help prevent a design from limiting what can be done with the rest of the property.
The best time to plan for a shed or vehicle storage area is before choosing the house that will sit beside it.
























