REFERENCE # : 2209103-2
BUY A SHED COURSE:
The ShedBlog has launched a course on the Teachable platform that will help shed buyers avoid making costly mistakes when buying a shed. Enroll here.
REFERENCE # : 2209103-2
Details of this Shed
Weight – Approximately: 3,900 kg
Span – 7.5 metres
Length – 10 metres (3 Bays: 3.5 metres, 3.5 metres, 3 metres)
Height – 5 metres
Roof Type – Gable, 15 degree pitch
Roof – ZINCALUME® steel TRIMCLAD® 0.42 BMT (0.47TCT) sheeting, BlueScope
Eaves – 0.5 metres (Soffits by others)
Walls & Trims – COLORBOND® steel TRIMCLAD® 0.42 BMT (0.47TCT) sheeting, BlueScope
Gutters – Big M Gutter. Nominal downpipe spacing = 3.5m.
Roller Doors – Two (2) COLORBOND® steel 3m high x 2.8m wide roller doors (roller door is wind rated). Door height will necessitate a manual system (by owner) to reach the top of the door for opening and closing. One (1) COLORBOND® steel 1.97m high x 1.95m wide roller door (roller door is wind rated). Refer to the General Specification (# Access Doors) in relation to opening sizes. The Roller Doors are boxed or steel wrapped for protection during transport.
PA Doors – One (1) 2040h x820w COLORBOND® steel door. Single skin metal clad door with COLORBOND® steel facings and fold-down vertical sides for strength and appearance. On a welded RHS frame, the door is pre-hung into a powdercoated frame. Supplied with a Knob/Knob entrance set;
Window Openings – Materials to frame up for window opening(s) including a header flashing to suit One (1) 900h x1200w window (supply of the window is NOT included).
Insulation – Lightweight 50-60mm Insulated Roofing Blanket, or equivalent performance specification. Insulation is a glass wool blanket with a reinforced laminated thermofoil face to one side. (Performance specification (R Value) change dependent on the ventilation. Insulation to the roof of the main building. Safety wire is provided to the roof area only.
Roof Ventilators – 2 x 300mm Ventilator(s) (same colour as roof).
Bracing – The building will have Knee and Apex braces. Minimum internal knee clearances are: Main Building 3.865m. Minimum internal apex clearance is: 5.388m.
Mezzanine – One (1) bay, starting at bay Three (3). Height under joist to be 2.4m, with a clearance under the bearer of 2.2m. Steel bearers and joists only. Bearers supported by One (1) mid columns. Stairs, balustrading and timber flooring supplied by others. Allowable floor load is 3.0kPa uniformly distributed. (Suitable for a office for general use or General storage up to 1.2m high – No concentrated loads).
Roof Purlins & Wall Girts – Z sections bolted to rafters & columns with a minimum overlap of 10% of the bay width.
Fixing to Concrete – Screw-Bolts fitted after concrete is cured.
Site Design Specifications
Site – North East NSW 2479 Australia
Building Class – 10
Importance Level – 2 with a Vr of 57 m/s
Design Wind Criteria – Region B; TC = 2.5; Mt = 1; Ms = 1; giving a Vdes of 47.2 m/s.
Other Design Factors – No Snow Loading allowed. No Earthquake Loading allowed.
Pricing at Sept 2022
Kit Price – $28,854.55
GST – $2,885.45
Delivery – FREE*
Promotional Discount (Early Santa Shed Savings) – ($2,390.00)
TOTAL (inc GST) – $29,350.00
* subject to standard delivery area
REFERENCE # : 2209103-2
Specific Inclusions
- Determination of the design criteria by the engineer. This includes assessment in 8 cardinal directions to determine the site design wind speed based on the building orientation.
- A comprehensive step by step Construction Kit. This kit is specific to your building and gives step by step, simple to follow instructions on how to build your building.
- Engineering certification of the steel building to the appropriate Australian Standards.
- Slab or Pier designs for soil classes A, S, M, H1 and H2.
- Materials, as nominated above, supplied as per the attached General Specification”.
- BlueScope – product warranties of up to 15 years apply.
Specific Exclusions
- Drawings, other than detailed above.
- Consent authority including any building, development or construction certificate application(s).
- Construction of the steel building and any foundations (the building is supplied as a kit).
- Insurance of the steel building once delivered to site or collected from the depot.
