REFERENCE # : 2501193
BUY A SHED COURSE:
The ShedBlog has launched a course on the Teachable platform that will help shed buyers avoid making costly mistakes when buying a shed. Enroll here.
REFERENCE # : 2501193
Details of this Shed
Building Class – 7b A building that is used for storage (warehouse), or display of goods or produce for sale by wholesale. (Refer NCC A6G8)
Weight – Approximately: 16900.00 kg
Span – Main Building: 15 m
Length – 40 m (8 Bays of 5 m each)
Height – 5 m
Roof Type – Gable, 10 degrees
Roof – ZINCALUME® steel CORODEK® 0.42 BMT sheeting, BlueScope
Walls & Trims – COLORBOND® steel TRIMCLAD® 0.42 BMT sheeting, BlueScope
Gutters – COLORBOND® GUTTER-02. We have calculated the number of [Supplied by Others] downpipes required for: Left Side = 12. Right Side = 12.
Roller Doors – One (1) COLORBOND® steel 2.6m high x 2.6m wide roller door (roller door is wind rated). An internal chain drive has been added to the door to assist with opening and closing the door at heights. Three (3) COLORBOND® steel 4.48m high x 3.66m wide roller doors supplied with a planetary gearing system (roller door is wind rated). Refer to the General Specification (# Access Doors) in relation to opening sizes. The Roller Doors are boxed or steel wrapped for protection during transport. Refer to the Building information for details on Industrial Door Handing.
PA Doors – Two (2) 920mm wide Double skin pre-hung doors with COLORBOND® steel® steel facings and fold-down vertical sides for strength and appearance. Powder coated welded frame.Supplied with a Knob/Lever entrance set.
Window Openings – Materials to frame up for window opening(s) including a header flashing to suit Fourteen (14) 1500h x1800w windows (supply of the window and glass sliding doors is NOT included).
Skylights – Four (4) sheets of 2400gsm Industrial Grade Translucent (Opal) Fibreglass. Two (2) on left side of steel building roof. Two (2) on right side of steel building roof.
Solar Panels – Your building has been designed to allow for the loads of a future installation of Solar Panels (by others). The information you have provided is that you require the maximum number of panels on your building. We calculate that you can fit 312 panels on your new steel building. This is typically 110.8kW of Solar Panels. You can of course also put panels on your home or other suitably designed structures to get the maximum benefit from your investment. We have engineered the building for panels to be placed on both sides of the main building.
Bracing – The building will have Knee and Apex braces. Clearances are subject to the engineer’s final design requirements. Estimated internal knee clearances are: Main Building 3.152m. Estimated internal apex clearance is: 5.513m.
Mezzanine – Two (2) bays, starting at bay One (1). Height under joist to be 2.7m, with a clearance under the bearer of 2.41m. Steel bearers and joists only. Bearers supported by Three (3) mid columns. Stairs, balustrading and timber flooring supplied by others. Allowable floor load is 3.0kPa uniformly distributed. 300kg/m2 uniformly distributed.
Roof Purlins & Wall Girts – Z sections bolted to rafters & columns with a minimum overlap of 10% of the bay width.
Fixing to Concrete – Screw-Bolts fitted after concrete is cured.
Site Design Specifications
Site – North Coast QLD 4820 Australia
NCC Version – NCC 2022
Design Wind Criteria for the Highest Cardinal Direction – Importance Level 2 with a Vr of 45.00 m/s ; Region A4; TC = 2.0; Mt = 1; Mc = 1; Ms = 1.0; giving a Vdes of 41.5 m/s.
Earthquake – An Earthquake Acceleration Co-efficient (Z) of up to 0.08 has been allowed for in the design of the building, however wind is the determining design factor.
Other Design Factors – No Snow Loading allowed
Pricing at Feb 2025
Kit Price – $117,827.27
GST – $11,782.73
Delivery – FREE*
Pay-on-Time discount – ($12,970.00)#
TOTAL (inc GST) – $116,640.00
* subject to standard delivery area
#Pay-on-Time discount is applied so long as the final payment is received 10 working days prior to the advised delivery date.
REFERENCE # : 2501193
Specific Inclusions
- Determination of the design criteria by the engineer. This includes assessment in 8 cardinal directions to determine the site design wind speed based on the building orientation.
- A comprehensive step by step Construction Kit. This kit is specific to your building and gives step by step, simple to follow instructions on how to build your building.
- Engineering certification of the steel building to the appropriate Australian Standards.
- Slab or Pier designs for soil classes A, S, M, H1 and H2.
- Materials, as nominated above, supplied as per the attached General Specification”.
- BlueScope – product warranties of up to 15 years apply.
Specific Exclusions
- Drawings, other than detailed above.
- Consent authority including any building, development or construction certificate application(s).
- Construction of the steel building and any foundations (the building is supplied as a kit).
- Insurance of the steel building once delivered to site or collected from the depot.
