REFERENCE # : 2305021

10m x 18m x 5m Zincalume Roof Shed With Mezzanine Floor, Roller Doors and PA Door

BUY A SHED COURSE:

The ShedBlog has launched a course on the Teachable platform that will help shed buyers avoid making costly mistakes when buying a shed. Enroll here.

REFERENCE # : 2305021

Details of this Shed

Weight – Approximately: 6,300 kg
Span – Main Building: 10 metres
Length – 18 metres (4 Bays of 4.5 metres each)
Height – 5 metres
Roof Type – Gable, 10 degree pitch
Roof – ZINCALUME® steel TRIMCLAD® 0.42 BMT (0.47TCT) sheeting, BlueScope
Walls & Trims – ZINCALUME® steel TRIMCLAD® 0.42 BMT (0.47TCT) sheeting, BlueScope
Gutters – 125 High Front quad gutter UNSLOTTED. Nominal downpipe spacing = 4.5m.
Roller Doors – Two (2) ZINCALUME® steel 4m high x 3.66m wide roller doors supplied with a planetary gearing system (roller door is not wind rated). Refer to the General Specification (# Access Doors) in relation to opening sizes. The Roller Doors are boxed or steel wrapped for protection during transport. Refer to the Building information for details on Industrial Door Handing.
PA Doors – One (1) 920mm wide pre-hung double skin ZINCALUME® steel steel door with keyed lockset and lever handle on both sides;
Bracing – The building will have Knee and Apex braces. Clearances are subject to the engineer’s final design requirements. Estimated internal knee clearances are: Main Building 3.554m. Estimated internal apex clearance is: 5.282m.
Mezzanine – One (1) bay, starting at bay Four (4). Height under joist to be 2.6m, with a clearance under the bearer of 2.35m. Steel bearers and joists only. Bearers supported by Two (2) mid columns. Stairs, balustrading and timber flooring supplied by others. Allowable floor load is 3.0kPa uniformly distributed. (Suitable for a office for general use or General storage up to 1.2m high – No concentrated loads).
Roof Purlins & Wall Girts – Z sections bolted to rafters & columns with a minimum overlap of 10% of the bay width.
Fixing to Concrete – Screw-Bolts fitted after concrete is cured.

Site Design Specifications

Site – South East SA 5491 Australia
Building Class – 10
NCC Version – NCC 2022
Design Wind Criteria for the Highest Cardinal Direction – Importance Level 2 with a Vr of 45 m/s; Region A1; TC = 2.5; Mt = 1; Mc = 0; Ms = 1; giving a Vdes of 39.2 m/s.
Other Design Factors – No Snow Loading allowed.

Pricing at May 2023

Kit Price – $41,481.82
GST – $4,148.18
Delivery – FREE*
Promotional Discount (Beat The Price Rise) – ($3,440.00)
TOTAL (inc GST) – $42,320.00
* subject to standard delivery area

REFERENCE # : 2305021

Specific Inclusions

  • Determination of the design criteria by the engineer. This includes assessment in 8 cardinal directions to determine the site design wind speed based on the building orientation.
  • A comprehensive step by step Construction Kit. This kit is specific to your building and gives step by step, simple to follow instructions on how to build your building.
  • Engineering certification of the steel building to the appropriate Australian Standards.
  • Slab or Pier designs for soil classes A, S, M, H1 and H2.
  • Materials, as nominated above, supplied as per the attached General Specification”.
  • BlueScope – product warranties of up to 15 years apply.

Specific Exclusions

  • Drawings, other than detailed above.
  • Consent authority including any building, development or construction certificate application(s).
  • Construction of the steel building and any foundations (the building is supplied as a kit).
  • Insurance of the steel building once delivered to site or collected from the depot.