Retroseal Ridgeseal

AU$329.70
Pack Size
Please choose
Selected Profile Code
Please choose
Optional Fastener Kit
Please choose
The Colorbond colour, Zinc or GAL
Enter your text
1
Save this product for later
Share this product with your friends
Retroseal Ridgeseal
Product Details

Helps vermin proof your shed, weather proof the ridge cap of your house or shed and even deters the entry of embers and sparks to your buildings roof cavity.

This flashing can seal those gaps down to 3 mm or less for Bushfire attack level ratings helping achieve BAL requirements. Keep out dirt and leaves, birds, mice and other vermin to like microbats and lizards.

Available in heavy duty Zincalume and Colorbond, simply let us know your colour selection on the right.

Give your building a neater finish, no tricky cutting-in of your ridge cap and scratching your roof sheets with your tin snips. Refer to profile codes below to ensure you order the correct product for your shed.

Perforated Ridgeseal slopes down the pitch of the roof. Meets all B.A.L ratings to F.Z. Made in Zincalume only.

OPTIONAL FASTENER KITS
Fastener kits are now available for Ridgeseal.
Each pack contains tek screws and a tek screw driver bit to match your Ridgeseal quantity.
The Small Pack suits up to 25.90m
The Medium Pack suits up to 36.57m
The Large Pack suits up to 61m
Please email us if you need more than the Large pack!
Please drop us a note in the comments section of your checkout with your roof sheeting colour so we can colour-code them.
These kits will be delivered separately to your Ridgeseal!

Find out how to install this product
Please refer to this cladding guide to help you order the right product for your shed.
Please do not short your order.
Minimum Order Quantities Apply.
Requests for small orders cannot be completed.
Shipping Notice
Shipping for these products is as follows.
NSW, VIC & QLD $60
SA & TAS $70
WA $100

NT - Please email us at admin@shedblog.com.au


They travel by TOLL Road and their on-forwarders or occasionally with Australia Post. Some locations may be deemed inaccessible by the freight network and will require collection from a regional depot.

AVAILABLE TO SUIT THESE PROFILES – Order codes

Corrugated, Corro, Corodek or Custom Orb – Order Code 10
Trimdek, Monoclad, Striproll Sureclad, Metroll Trimclad – Order Code 9
Steeline Steelclad, Fielders TL5, Titan Qdek, Q Steel Adek – Order Code 9
Apex Apclad = order code 9APC
Stramit Longspan = order code 9LS
Lysaght Spandek = order code 9SD
Metroll Metrospan = order code 9MS
Apex Apspan = order code 9APS
Stratco Smartspan = order code 9SS
Accent 21 Lysaght = order code Accent 21

Designed to fit under the edge of your sheds ridge capping on gable to gable ridges. Ridgeseal comes in 762mm lengths to suit most roof sheet sizes and 700mm lengths to suit the longspan sheeting profiles. Reduce the gaps in your ridge to less than 3mm as per the BAL building guidelines for ember attack. Works best with Rolltop ridgecap or Ridgecap that has the shorter break bend. Now also available for Accent 21.

FREQUENTLY ASKED QUESTIONS
How to install vermin seals?

For how to install ShedBlog-supplied products go here - https://shedblog.com.au/how-to-install-shed-produc...

Can I exchange my vermin and ember seal order?
Orders placed incorrectly or being returned or exchanged have a 10% restocking charge. The cost of return freight is borne by the purchaser.
If replacements are being shipped a minimum re-delivery charge of $40.00 will apply to the replacement order plus any additional price difference between products will be added or subtracted accordingly.
Change of mind returns for Vermin seals of some varieties will be considered on a case-by-case basis and by prior arrangement. They attract a 20% restocking charge plus the actual cost of original freight will be deducted. The cost of return freight is borne by the purchaser who is returning the products.
Can I order a piece or two of vermin proofing if I'm short?

Unfortunately, our manufacturing arrangements mean we have to order in quantities of 18.28m or more. This is why the quantities are listed as such on the website. Don't short your order please.

Can I pick up my vermin or ember seals order?

Our Vermin & Emberseal manufacturer does not operate pickup or maintain any payment facilities at the factory. Orders online are delivered directly to you in most circumstances.

Can I still install a vermin seal after the shed is built?

We have a wide range of retroseals suitable for installing on sheds that are already built. Vermaseal itself is for installation during the build.

How do you transport my purchase?

Vermin seals are shipped via TOLL and sometimes Australia Post

How long does it take to manufacture my order?

Vermin and ember seal products– usually despatched within 3-5 working days. Orders placed incorrectly or being returned or exchanged have a 10% restocking charge. The cost of return freight is borne by the purchaser. A minimum re-delivery charge of $38.00 will apply to the replacement order plus any additional price difference between products.

How much vermin seal should I order?

It is always best to order slightly more than you need as the Minimum Order Quantity for vermin & ember seals is 18m. This min qty is not set by us, it is set by the factory. So if you don’t order enough then you would be up for another lot of freight and potentially the minimum order of 18m. You can always email or call if you need special assistance calculating how much vermin/ember seal you need.

Is it possible to install vermin seals with my insulated shed?

It's possible, it can be a little more fiddly, While many of the retroseals would suit, the product Combination Seal is the best for already insulated sheds and shed homes.

May I ask for product samples?

Send us your details at admin@shedblog.com.au and we can arrange a sample. Please also let us know what you need to achieve just in case we can suggest a better product for the job.

My Retroseal Superseal is not Fitting. How to resolve this?

Find our product install guides here. It’s usually due to incorrect installation method or ordering the wrong profile. Please send photo of the situation. Remember! Superseal installs at approximately a 30- 45 deg angle so please fix a receiver strip in place first, and place clip onto strip and check fit that way. Instructions are either attached to the box or inside the box.

What Vermin seal profile code is best for my shed?

This depends on the profile of your shed cladding and the purpose (vermin and or embers) Have a look at our cladding guide which can help you to know what works for your shed.

Where is Vermaseal made?

Australia! Northern Rivers, NSW

How to calculate my roof pitch?

If you’re not sure of your roof pitch, take a look at our handy calculator to work it out.

How do I identify my wall or roof profile?

Please refer to this cladding guide to help you order the right product for your shed.


ANY QUESTIONS? CHECK OUT THE COMPREHENSIVE FAQ PAGE

OR CONTACT OUR CUSTOMER SERVICE TEAM NOW ADMIN@SHEDBLOG.COM.AU


Any questions? 
check out THE comprehensive FAQ page

or contact our customer service team now on 0456 729 904 
or email us at 
admin@shedblog.com.au