If you don’t have any vermin seal in your shed already then this is designed for fitting to existing buildings. Keep everyone happy by keeping the critters out!!
You can install Retroseal Domestic during the construction of your new Shed or after. With some simple onsite trimming to gain the best fit you can provide a great deterrent against vermin and protection from the elements and corrosion protection for your sheeting from the chemicals in concrete.
Retroseal Domestic not only seals the sheeting profile so that vermin are prevented from entering the Shed through your sheetings profile, it also prevents wind and rain from coming up under the sheeting.
A third and major benefit of Retroseal Domestic is the action of isolating your sheeting from the concrete slab and the chemicals in concrete that can lead to early corrosion of your sheetings bottom edge.
OPTIONAL FASTENER KITS
Fastener kits are now available for Retroseal Domestic.
Each pack contains tek screws, nylon pin anchors, a drill bit, a tek screw driver bit and a masonry drill bit to match your Retroseal Domestic quantity.
You can also select the same pack with silicone!
The Small Pack suits up to 24.38m
The Medium Pack suits up to 45.7m
The Large Pack suits up to 68.5m
Please email us if you need more than the Large pack!
These kits will be delivered separately to your Retroseal Domestic!
| Find out how to install this product Please refer to this cladding guide to help you order the right product for your shed. |
| Please do not short your order. Minimum Order Quantities Apply. Requests for small orders cannot be completed. |
NT - Please email us at admin@shedblog.com.au
Click here to view PDF of how Retroseal Domestic operates.
Click here to view PDF of how to install Retroseal Domestic products.
The 2 shapes available are
Stramit Monoclad, Striproll Sureclad, Stratco Superdek (Code 1) and Corro, Custom Orb, Corrodek, Corrugated. (Code 2)
High profile cladding profile variances across different roll-former’s mean we suggest Superseal as the best option for Trimdek Trimclad or Trimwall.
A small price to pay to help protect the investment you have made in your new or existing steel shed. An alternative product for other profile options not seen here like multiclad, K Panel, Totalspan and for other wall sheet profiles see Retroseal Superseal.
How to install vermin seals?
For how to install ShedBlog-supplied products go here - https://shedblog.com.au/how-to-install-shed-produc...
Can I exchange my vermin and ember seal order?
Can I order a piece or two of vermin proofing if I'm short?
Unfortunately, our manufacturing arrangements mean we have to order in quantities of 18.28m or more. This is why the quantities are listed as such on the website. Don't short your order please.
Can I pick up my vermin or ember seals order?
Our Vermin & Emberseal manufacturer does not operate pickup or maintain any payment facilities at the factory. Orders online are delivered directly to you in most circumstances.
Can I still install a vermin seal after the shed is built?
We have a wide range of retroseals suitable for installing on sheds that are already built. Vermaseal itself is for installation during the build.
How do you transport my purchase?
Vermin seals are shipped via TOLL and sometimes Australia Post
How long does it take to manufacture my order?
Vermin and ember seal products– usually despatched within 3-5 working days. Orders placed incorrectly or being returned or exchanged have a 10% restocking charge. The cost of return freight is borne by the purchaser. A minimum re-delivery charge of $38.00 will apply to the replacement order plus any additional price difference between products.
How much vermin seal should I order?
It is always best to order slightly more than you need as the Minimum Order Quantity for vermin & ember seals is 18m. This min qty is not set by us, it is set by the factory. So if you don’t order enough then you would be up for another lot of freight and potentially the minimum order of 18m. You can always email or call if you need special assistance calculating how much vermin/ember seal you need.
Is it possible to install vermin seals with my insulated shed?
It's possible, it can be a little more fiddly, While many of the retroseals would suit, the product Combination Seal is the best for already insulated sheds and shed homes.
May I ask for product samples?
Send us your details at admin@shedblog.com.au and we can arrange a sample. Please also let us know what you need to achieve just in case we can suggest a better product for the job.
My Retroseal Superseal is not Fitting. How to resolve this?
Find our product install guides here. It’s usually due to incorrect installation method or ordering the wrong profile. Please send photo of the situation. Remember! Superseal installs at approximately a 30- 45 deg angle so please fix a receiver strip in place first, and place clip onto strip and check fit that way. Instructions are either attached to the box or inside the box.
What Vermin seal profile code is best for my shed?
This depends on the profile of your shed cladding and the purpose (vermin and or embers) Have a look at our cladding guide which can help you to know what works for your shed.
Where is Vermaseal made?
Australia! Northern Rivers, NSW
How to calculate my roof pitch?
If you’re not sure of your roof pitch, take a look at our handy calculator to work it out.
How do I identify my wall or roof profile?
Please refer to this cladding guide to help you order the right product for your shed.
ANY QUESTIONS? CHECK OUT THE COMPREHENSIVE FAQ PAGE
OR CONTACT OUR CUSTOMER SERVICE TEAM NOW ADMIN@SHEDBLOG.COM.AU
Any questions?
check out THE comprehensive FAQ page
or contact our customer service team now on 0456 729 904
or email us at admin@shedblog.com.au
