Skillion Seal pre-cut Apron Flashing
Skillion PRE-CUT seal is a two piece design flashing from Campbell Shed Products which can be used when you are placing a skillion roof off the side of an existing shed or garage. Instead of cutting and resheeting the side wall you can build your roof then apply the specially designed flashing and silicon sealant to achieve a sound weather tight extension.
The idea is that you nominate the two profiles of cladding that the flashing will meet, the wall and the roof. Make sure you Weather the top of the roof sheets where they butt the wall. When constructing you then position and fasten the flashing as appropriate. Once assembled you apply a liberal bead of quality silicon sealant to the top edge of the top seal which completes the job.
To order - Select the pack size you require remembering that this is two piece flashing eg. a 24 piece pack will provide enough flashings to cover a 9.14m roof to wall seal. In the drop down boxes select the appropriate “Roof Profile” and “Wall Profile” and then nominate the colours required in the colour box. ALSO we can provide profiles for Corro, Monoclad, Spandek, Smartspan, Metrospan, Sureclad, Superdek, etc. If you have any questions before ordering, please send an email to mailto:firstname.lastname@example.org
|Find out how to install this product
|Please do not short your order.
Minimum Order Quantities Apply.
Requests for small orders cannot be completed.
- Easy to fit
- No need to cut wall sheeting
- Flashings are sheet width for easy install
- Colorbond or Zincalume
- Use on barns, farm sheds, carports, annexes, patios, extensions
- Use in place of traditional Apron Flashings when adding on to an existing building.
How to install vermin seals?
For how to install ShedBlog-supplied products go here - https://shedblog.com.au/how-to-install-shed-produc...
Can I exchange my vermin and ember seal order?
Can I order a piece or two of vermin proofing if I'm short?
Unfortunately, our manufacturing arrangements mean we have to order in quantities of 18.28m or more. This is why the quantities are listed as such on the website. Don't short your order please.
Can I pick up my vermin or ember seals order?
Our Vermin & Emberseal manufacturer does not operate pickup or maintain any payment facilities at the factory. Orders online are delivered directly to you in most circumstances.
Can I still install a vermin seal after the shed is built?
We have a wide range of retroseals suitable for installing on sheds that are already built. Vermaseal itself is for installation during the build.
How do you transport my purchase?
Vermin seals are shipped via TOLL and sometimes Australia Post
How long does it take to manufacture my order?
Vermin and ember seal products– usually despatched within 3-5 working days. Orders placed incorrectly or being returned or exchanged have a 10% restocking charge. The cost of return freight is borne by the purchaser. A minimum re-delivery charge of $38.00 will apply to the replacement order plus any additional price difference between products.
How much vermin seal should I order?
It is always best to order slightly more than you need as the Minimum Order Quantity for vermin & ember seals is 18m. This min qty is not set by us, it is set by the factory. So if you don’t order enough then you would be up for another lot of freight and potentially the minimum order of 18m. You can always email or call if you need special assistance calculating how much vermin/ember seal you need.
Is it possible to install vermin seals with my insulated shed?
It's possible, it can be a little more fiddly, While many of the retroseals would suit, the product Combination Seal is the best for already insulated sheds and shed homes.
May I ask for product samples?
Send us your details at email@example.com and we can arrange a sample. Please also let us know what you need to achieve just in case we can suggest a better product for the job.
My Retroseal Superseal is not Fitting. How to resolve this?
Find our product install guides here. It’s usually due to incorrect installation method or ordering the wrong profile. Please send photo of the situation. Remember! Superseal installs at approximately a 30- 45 deg angle so please fix a receiver strip in place first, and place clip onto strip and check fit that way. Instructions are either attached to the box or inside the box.
What Vermin seal profile code is best for my shed?
This depends on the profile of your shed cladding and the purpose (vermin and or embers) Have a look at our cladding guide which can help you to know what works for your shed.
Where is Vermaseal made?
Australia! Northern Rivers, NSW
ANY QUESTIONS? CHECK OUT THE COMPREHENSIVE FAQ PAGE
OR CONTACT OUR CUSTOMER SERVICE TEAM NOW ADMIN@SHEDBLOG.COM.AU