VERMASEAL – VERMIN PROOFING
Protect the investment you have made in your shed.
Vermaseal not only seals the bottom of the sheeting profile so that vermin are prevented from entering the Shed at the bottom wall edge, but it also prevents wind and rain from coming up under the sheeting.
This product also isolates your sheeting from the concrete slab and the chemicals in concrete that can lead to early corrosion of your sheet's bottom edge. You can colour-match Vermaseal using Colorbond Coverflash available on the ordering tab.
|Please do not short your order.
Minimum Order Quantities Apply.
Requests for small orders cannot be completed.
Vermaseal is designed to be installed during construction and suits cladding with a 20-30mm slab overhang.
|Find out how to install this product
There are 12 different pack size options available. The minimum pack size is 14 pieces or 21m.
Vermaseal PVC is available in full box lots of 42 pieces which cover 63 metres.
Share a box with a mate or you can buy it in the different size job lot options.
if you require Steel Vermaseal for Bushfire prone regions to meet BAL levels then please check out Vermaseal STEEL.
OPTIONAL EXTRA – COLORBOND COVERFLASH
If you would like to colour-match the Vermaseal to your shed you can navigate back to this page and add Cover Flashings to your online shopping cart, they are listed in pack sizes below the Vermaseal packs. Coverflash is supplied in 1.2m lengths and 19.2m is the minimum order here. Please use the drop-down box to select the colour flashing you require. There is no need to select a colour if you are just ordering Vermaseal. You can also just order Coverflash if you already have your Vermaseal and just need to add Coverflash.
Need a retrofit product to seal your walls? See Retroseal Superseal.
Need to seal Corrugated or Custom Orb walls the see Retroseal Domestic?
See the full range of Vermin and Emberseal retrofit products here.
How to install vermin seals?
For how to install ShedBlog-supplied products go here - https://shedblog.com.au/how-to-install-shed-produc...
Can I exchange my vermin and ember seal order?
Can I order a piece or two of vermin proofing if I'm short?
Unfortunately, our manufacturing arrangements mean we have to order in quantities of 18.28m or more. This is why the quantities are listed as such on the website. Don't short your order please.
Can I pick up my vermin or ember seals order?
Our Vermin & Emberseal manufacturer does not operate pickup or maintain any payment facilities at the factory. Orders online are delivered directly to you in most circumstances.
Can I still install a vermin seal after the shed is built?
We have a wide range of retroseals suitable for installing on sheds that are already built. Vermaseal itself is for installation during the build.
How do you transport my purchase?
Vermin seals are shipped via TOLL and sometimes Australia Post
How long does it take to manufacture my order?
Vermin and ember seal products– usually despatched within 3-5 working days. Orders placed incorrectly or being returned or exchanged have a 10% restocking charge. The cost of return freight is borne by the purchaser. A minimum re-delivery charge of $38.00 will apply to the replacement order plus any additional price difference between products.
How much vermin seal should I order?
It is always best to order slightly more than you need as the Minimum Order Quantity for vermin & ember seals is 18m. This min qty is not set by us, it is set by the factory. So if you don’t order enough then you would be up for another lot of freight and potentially the minimum order of 18m. You can always email or call if you need special assistance calculating how much vermin/ember seal you need.
Is it possible to install vermin seals with my insulated shed?
It's possible, it can be a little more fiddly, While many of the retroseals would suit, the product Combination Seal is the best for already insulated sheds and shed homes.
May I ask for product samples?
Send us your details at email@example.com and we can arrange a sample. Please also let us know what you need to achieve just in case we can suggest a better product for the job.
My Retroseal Superseal is not Fitting. How to resolve this?
Find our product install guides here. It’s usually due to incorrect installation method or ordering the wrong profile. Please send photo of the situation. Remember! Superseal installs at approximately a 30- 45 deg angle so please fix a receiver strip in place first, and place clip onto strip and check fit that way. Instructions are either attached to the box or inside the box.
What Vermin seal profile code is best for my shed?
This depends on the profile of your shed cladding and the purpose (vermin and or embers) Have a look at our cladding guide which can help you to know what works for your shed.
Where is Vermaseal made?
Australia! Northern Rivers, NSW
ANY QUESTIONS? CHECK OUT THE COMPREHENSIVE FAQ PAGE
OR CONTACT OUR CUSTOMER SERVICE TEAM NOW ADMIN@SHEDBLOG.COM.AU