Perforated Eave Vent - Eaveseal with Ventilation

65124
AU$376.30
In stock
1
Product Details

Do you want to seal your eaves, the end of your roof sheets or up under the verandah against vermin but also want to keep it ventilated? Keep the air flowing?

Look no further than our innovative new product called Perforated Eave Vent. It is available in corrugated profile and manufactured from Zincalume to suit zincalume and colorbnd roofs.
It seals the pesky gaps created between your corrugated roof sheeting and the top plate, fascia or roof batten yet allows ventilation.

This roofing product helps keep all the usual vermin out of the shed or home like mice, rates, snakes, lizards, birds like sparrows and small and micro bats.

Check out our Ridge Vent product here for sealing while maintaining ventilation along your ridge cap.

How to Order - Select the pack size required, indicate what type of corrugated roofing material you have and what the roof pitch is, as it goes past the fixing point.

Find out how to install this product
Shipping Notice
Shipping for these products is as follows.
NSW, VIC & QLD $60
SA & TAS $70
WA $100 and NT $125

They travel by TOLL Road and their on-forwarders or occasionally with Australia Post. Some locations may be deemed inaccessible by the freight network and will require collection from a regional depot.

Perforated Eave Vent Ventilation Eaveseal is an innovative new product. It can be used against vermin.

FREQUENTLY ASKED QUESTIONS
How to install vermin seals?

For how to install ShedBlog-supplied products go here - https://shedblog.com.au/how-to-install-shed-produc...

Can I exchange my vermin and ember seal order?
Orders placed incorrectly or being returned or exchanged have a 10% restocking charge. The cost of return freight is borne by the purchaser.
If replacements are being shipped a minimum re-delivery charge of $40.00 will apply to the replacement order plus any additional price difference between products will be added or subtracted accordingly.
Change of mind returns for Vermin seals of some varieties will be considered on a case-by-case basis and by prior arrangement. They attract a 20% restocking charge plus the actual cost of original freight will be deducted. The cost of return freight is borne by the purchaser who is returning the products.
Can I order a piece or two of vermin proofing if I'm short?

Unfortunately, our manufacturing arrangements mean we have to order in quantities of 18.28m or more. This is why the quantities are listed as such on the website. Don't short your order please.

Can I pick up my vermin or ember seals order?

Our Vermin & Emberseal manufacturer does not operate pickup or maintain any payment facilities at the factory. Orders online are delivered directly to you in most circumstances.

Can I still install a vermin seal after the shed is built?

We have a wide range of retroseals suitable for installing on sheds that are already built. Vermaseal itself is for installation during the build.

How do you transport my purchase?

Vermin seals are shipped via TOLL and sometimes Australia Post

How long does it take to manufacture my order?

Vermin and ember seal products– usually despatched within 3-5 working days. Orders placed incorrectly or being returned or exchanged have a 10% restocking charge. The cost of return freight is borne by the purchaser. A minimum re-delivery charge of $38.00 will apply to the replacement order plus any additional price difference between products.

How much vermin seal should I order?

It is always best to order slightly more than you need as the Minimum Order Quantity for vermin & ember seals is 18m. This min qty is not set by us, it is set by the factory. So if you don’t order enough then you would be up for another lot of freight and potentially the minimum order of 18m. You can always email or call if you need special assistance calculating how much vermin/ember seal you need.

Is it possible to install vermin seals with my insulated shed?

It's possible, it can be a little more fiddly, While many of the retroseals would suit, the product Combination Seal is the best for already insulated sheds and shed homes.

May I ask for product samples?

Send us your details at admin@shedblog.com.au and we can arrange a sample. Please also let us know what you need to achieve just in case we can suggest a better product for the job.

My Retroseal Superseal is not Fitting. How to resolve this?

Find our product install guides here. It’s usually due to incorrect installation method or ordering the wrong profile. Please send photo of the situation. Remember! Superseal installs at approximately a 30- 45 deg angle so please fix a receiver strip in place first, and place clip onto strip and check fit that way. Instructions are either attached to the box or inside the box.

What Vermin seal profile code is best for my shed?

This depends on the profile of your shed cladding and the purpose (vermin and or embers) Have a look at our cladding guide which can help you to know what works for your shed.

Where is Vermaseal made?

Australia! Northern Rivers, NSW



ANY QUESTIONS? CHECK OUT THE COMPREHENSIVE FAQ PAGE

OR CONTACT OUR CUSTOMER SERVICE TEAM NOW ADMIN@SHEDBLOG.COM.AU

Save this product for later

Any questions? 
check out THE comprehensive FAQ page

or contact our customer service team now on 0456 729 904 
or email us at 
admin@shedblog.com.au