Insulshed 50 insulation by Air-Cell is your solution for comfort in your shed. Achieving indoor temperatures that are noticeably cooler in summer and warmer in winter.
Insulshed 50 is manufactured with a patented closed-cell foam structure sandwiched by a highly reflective foil surface, it is a fibre-free, non-allergenic alternative to conventional bulk insulation. It is easy to install and can retrofit using tek screws.
Insulshed 50 is specifically designed for class 10a buildings (sheds and garages). For habitable dwellings, offices, factories, commercial buildings and the like, we recommend Insulbreak 65 and Insulbreak 80.
How to Buy – Select the size rolls you require, 22m or 33m long and add the required number of rolls to your shopping cart. Note! We have a 3 roll and 6 roll deal so it may be better to add the 3 or 6 roll multipack instead. We recommend adding the tape and or spacer biscuits after adding the insulation so you can tailor the quantities to suit.
Delivery – Pick up is available. Due to the bulky nature of these goods, a delivery is $145 per order. During check out you will be able to select whether you want delivery or to arrange your own pick up from a depot in a capital city saving you the delivery charge. To WA locations outside of the Perth / Fremantle greater Metro areas and outside Darwin, Northern Territory deliveries there may be some additional freight. Our price will still be great. Please contact us so we can quote you. (Note: TASMANIA Delivery is not available and Pick up is from Melbourne or Sydney)
| Find out how to install this product |
PEOPLE ALSO ASK
Should I insulate my shed?
The short answer is yes. It would depend on the purpose on the dwelling as to what insulation will be best suited. It will mean a cooler shed in summer and a warmer shed in winter. You can email admin@shedblog.com.au for advice.
Can I pick up my insulation order from the warehouse?
Perth – Hazelmere WA 6055
Can I return whole unused rolls of Kingspan Insulation?
It is not possible to return Kingspan Products except where prior arrangement has been made and this only applies to large commercial orders above 30 rolls. There is a 25% restocking charge applied and it is the responsibility of the purchaser to cover the return cost of the product.
How do you retro fit to a flat colorbond roof?
The insulation should be installed to the underside of the roof purlins or battens, you can nail or screw it as appropriate, Tape the edges and overlaps to seal in a blanket effect.
How can this insulation be installed into an existing shed? Do I have to remove the roof sheets?
Most people when retrofitting this type of insulation will fasten it to the roof or wall battens with wafer head tek screws and tape the overlaps. Use some of the tape to help you position it, then screw off.
ANY QUESTIONS? CHECK OUT THE COMPREHENSIVE FAQ PAGE
OR CONTACT OUR CUSTOMER SERVICE TEAM NOW admin@shedblog.com.au
Any questions?
check out THE comprehensive FAQ page
or contact our customer service team now on 0456 729 904
or email us at admin@shedblog.com.au
