REFERENCE # : 2210152
BUY A SHED COURSE:
The ShedBlog has launched a course on the Teachable platform that will help shed buyers avoid making costly mistakes when buying a shed. Enroll here.
REFERENCE # : 2210152
Details of this Shed
Weight – Approximately: 3,300 kg
Span – 8 metres
Length – 12 metres (3 Bays: 3 metres, 3 metres, 6 metres)
Height – 3.2 metres
Roof Type – Gable, 10 degree pitch
Roof – COLORBOND® steel TRIMCLAD® 0.42 BMT (0.47TCT) sheeting, BlueScope
Walls & Trims – COLORBOND® steel TRIMCLAD® 0.42 BMT (0.47TCT) sheeting, BlueScope
Roller Doors – Two (2) COLORBOND® steel 2.77m high x 5m wide roller doors (roller door is wind rated). An internal chain drive has been added to the door to assist with opening and closing the door at heights. Refer to the General Specification (# Access Doors) in relation to opening sizes. The Roller Doors are boxed or steel wrapped for protection during transport.
PA Doors – Two (2) 2040h x820w COLORBOND® steel doors. Single skin metal clad door with COLORBOND® steel facings and fold-down vertical sides for strength and appearance. On a welded RHS frame, the door is pre-hung into a powdercoated frame. Supplied with a Knob/Knob entrance set;
Skylights – Six (6) sheets of 2400gsm Industrial Grade Translucent (Opal) Fibreglass. Three (3) on left side of steel building roof. Three (3) on right side of steel building roof.
Dividing Walls – One (1) running across the span of the building. COLORBOND® steel TRIMCLAD® 0.42 BMT (0.47TCT) sheeting. This wall is structural – it must be installed and cannot be moved at any time.
Insulation – Lightweight 50-60mm Insulated Roofing Blanket, or equivalent performance specification. Insulation is a glass wool blanket with a reinforced laminated thermofoil face to one side. (Performance specification (R Value) change dependent on the ventilation. Insulation to the roof of the main building. Safety wire is provided to the roof area only.
Vermin Flashing – PVC Vermin Proofing has been included to the perimeter of the building excluding any openings
Roof Ventilators – 3 x 300mm Ventilator(s) (same colour as roof).
Bracing – The building will have Knee and Apex braces. Minimum internal knee clearances are: Main Building 2.464m. Minimum internal apex clearance is: 3.385m.
Roof Purlins & Wall Girts – Z sections bolted to rafters & columns with a minimum overlap of 10% of the bay width.
Fixing to Concrete – Screw-Bolts fitted after concrete is cured.
Site Design Specifications
Site – Central Coast QLD 4620 Australia
Building Class – 10
Importance Level – 2 with a Vr of 57 m/s
Design Wind Criteria – Region B; TC = 2.0; Mt = 1; Ms = 1.0; giving a Vdes of 49.3 m/s.
Other Design Factors – No Snow Loading allowed. No Earthquake Loading allowed.
Pricing at Oct 2022
Kit Price – $28,972.73
GST – $2,897.27
Delivery – FREE*
Promotional Discount (Early Santa Shed Savings) – ($2,390.00)
TOTAL (inc GST) – $29,480.00
* subject to standard delivery area
REFERENCE # : 2210152
Specific Inclusions
- Determination of the design criteria by the engineer. This includes assessment in 8 cardinal directions to determine the site design wind speed based on the building orientation.
- A comprehensive step by step Construction Kit. This kit is specific to your building and gives step by step, simple to follow instructions on how to build your building.
- Engineering certification of the steel building to the appropriate Australian Standards.
- Slab or Pier designs for soil classes A, S, M, H1 and H2.
- Materials, as nominated above, supplied as per the attached General Specification”.
- BlueScope – product warranties of up to 15 years apply.
Specific Exclusions
- Drawings, other than detailed above.
- Consent authority including any building, development or construction certificate application(s).
- Construction of the steel building and any foundations (the building is supplied as a kit).
- Insurance of the steel building once delivered to site or collected from the depot.
