REFERENCE # : 2212002
BUY A SHED COURSE:
The ShedBlog has launched a course on the Teachable platform that will help shed buyers avoid making costly mistakes when buying a shed. Enroll here.
REFERENCE # : 2212002
Details of this Shed
Weight – Approximately: 2,300 kg
Span – 5 metres
Length – 10 metres (3 Bays: 3.33 metres, 3.33 metres, 3.33 metres)
Height – 3 metres (Low Side), 3.88 metres (High Side)
Roof Type – Skillion, 10 degree pitch
Roof – ZINCALUME® steel CORODEK® 0.42 BMT (0.47TCT) sheeting, BlueScope
Walls & Trims – COLORBOND® steel CORODEK® 0.42 BMT (0.47TCT) sheeting, BlueScope
Gutters – 115 High Front quad gutter – Unslotted . Nominal downpipe spacing = 3.3m.
Roller Doors – One (1) COLORBOND® steel 2.6m high x 2.6m wide roller door (roller door is wind rated). Door height will necessitate a manual system (by owner) to reach the top of the door for opening and closing. One (1) COLORBOND® steel 2.58m high x 2.6m wide roller door (roller door is wind rated). Door height will necessitate a manual system (by owner) to reach the top of the door for opening and closing. Refer to the General Specification (# Access Doors) in relation to opening sizes. The Roller Doors are boxed or steel wrapped for protection during transport.
PA Doors – Two (2) 2040h x820w COLORBOND® steel doors. Single skin metal clad door with COLORBOND® steel facings and fold-down vertical sides for strength and appearance. On a welded RHS frame, the door is pre-hung into a powdercoated frame. Supplied with a Knob/Knob entrance set;
Skylights – Two (2) sheets of 2400gsm Industrial Grade Translucent (Opal) Fibreglass. Two (2) on right side of steel building roof.
Roof Ventilators 1 x 300mm Ventilator(s) (same colour as roof).
Bracing – The building will have Knee braces. Minimum internal knee clearances are: Main Building 3.229m (Left Side), 2.477m (Right Side) .
Left Lean-to
Span – 3.8m
Drop – 0.8 metres from eave height
Pitch – 06 degrees
Length – Starting bay 1 for 3 bays
Height of External Lean-to wall – 2.68m
Three (3) 3.33m open bays – along the sides of the leanto. Two (2) 3.8m open bays on the ends of the leanto. Refer to Layout (attached) for location & height clearances.
Roof Purlins & Wall Girts – Tophat sections with a minimum overlap of 10% of the bay width.
Fixing to Concrete – Screw-Bolts fitted after concrete is cured.
Site Design Specifications
Site – Northern ACT 2903 Australia
Building Class – 10
Importance Level – 2 with a Vr of 45 m/s
Design Wind Criteria – Region A3; TC = 2.5; Mt = 1; Ms = 1; giving a Vdes of 39.2 m/s.
Other Design Factors – No Snow Loading allowed.
Pricing at Dec 2022
Kit Price – $17,836.36
GST – $1,783.64
Delivery – FREE*
Promotional Discount (Beat The New Year Rush) – ($1,480.00)
TOTAL (inc GST) – $18,140.00
* subject to standard delivery area
REFERENCE # : 2212002
Specific Inclusions
- Determination of the design criteria by the engineer. This includes assessment in 8 cardinal directions to determine the site design wind speed based on the building orientation.
- A comprehensive step by step Construction Kit. This kit is specific to your building and gives step by step, simple to follow instructions on how to build your building.
- Engineering certification of the steel building to the appropriate Australian Standards.
- Slab or Pier designs for soil classes A, S, M, H1 and H2.
- Materials, as nominated above, supplied as per the attached General Specification”.
- BlueScope – product warranties of up to 15 years apply.
Specific Exclusions
- Drawings, other than detailed above.
- Consent authority including any building, development or construction certificate application(s).
- Construction of the steel building and any foundations (the building is supplied as a kit).
- Insurance of the steel building once delivered to site or collected from the depot.
